Advertise on fullfatrr.com »

Home > In Car Electronics (L322) > How to replace camera module
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
King Cinder



Member Since: 17 Aug 2024
Location: Wales
Posts: 2

United Kingdom 2011 Range Rover Autobiography 4.4 V8 Zermatt Silver
How to replace camera module

Could anyone advise me how to replace the camera module on a 2011 L322 please?

I have a replacement given to me by the previous owner,he told me it's under the front passenger seat.

Is this correct? Also how simple/complicated job is it likely to be?

I have a reasonable mechanical aptitude and good selection of tools,can turn my hand to most things.

Many thanks in advance

Post #698549 21st Aug 2024 5:28pm
View user's profile Send private message View poster's gallery Reply with quote
Rawly86



Member Since: 09 Sep 2024
Location: Bedford
Posts: 4

United Kingdom 2010 Range Rover Vogue SE TDV8 Santorini Black

If like to know this too, and does anyone have the module part number?
Thanks

Post #700816 24th Sep 2024 7:59pm
View user's profile Send private message View poster's gallery Reply with quote
Scouse Exile



Member Since: 09 Dec 2022
Location: East Midlands
Posts: 301

United Kingdom 2007 Range Rover Vogue TDV8 Buckingham Blue

I might be peeing in the wind here but are you sure its a camera module you have as the workshop manual refers to the following;

The rear view camera is located under the rear spoiler on the upper tail door, adjacent to the center high mounted stop lamp. The rear view camera is connected directly to the touch screen display via a co-axial cable. The rear view camera transmits a wide angle, color image of the area at the rear of the vehicle which is displayed on the touch screen display when reverse gear is selected.

The signal for the camera comes from the TCM as described here:

When reverse gear is selected, the TCM provides a reverse gear signal to the integrated head unit over the high speed CAN bus. On receipt of the reverse gear signal, the integrated head unit will instruct the touch screen display to display the image from the rear view camera.

Does the part you have look like this by any chance?




Jon

Post #700822 24th Sep 2024 9:29pm
View user's profile Send private message View poster's gallery Reply with quote
King Cinder



Member Since: 17 Aug 2024
Location: Wales
Posts: 2

United Kingdom 2011 Range Rover Autobiography 4.4 V8 Zermatt Silver

Hi there

The module is identical to the one pictured as far as I can see.

I was having my Oil Cooler replaced by my local independent last week along with a service and so I asked them to do fit this part.

They actually questioned as to if it was actually the module and not the camera.

However change it they did and all is now working as it should with reverse view selection and the touch screen camera functions too.

Post #700831 25th Sep 2024 3:03am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
fullfatrr.com RSS Feed - All Forums


Switch to Mobile site