I replaced the left hand front strut before Christmas and have just changed the right hand front strut.

I've tried the recalibration process but I'm not convinced everything is working as expected.

I'm wondering what the ride height sensor voltages should look like using IID, rather than the actual measurements. Despite measuring and setting things in the IID, the voltages from the two front ride high sensors seem to be at odds to what I would expect.

Any suggestions as to what might be going on?

Click image to enlarge

First of all try using the calibration values to get it in mm and not metres
Menu--Live Values--Quick List--Suspension--Calibration
I don't think the voltages are useful BTW. 2012 TDV8 Vogue (L322)