Advertise on fullfatrr.com »

Home > Maintenance & Mods (L322) > Rear brake calipers
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
mgrover



Member Since: 03 May 2020
Location: Leeds
Posts: 399

United Kingdom 2011 Range Rover Vogue TDV8 Santorini Black
Rear brake calipers

Is it worth refurbing these or just replacing them entirely? Its actually a sport Sad

Not anymore, 4.4 TDV8 now Very Happy

Post #686746 29th Feb 2024 8:57am
View user's profile Send private message View poster's gallery Reply with quote
JayGee



Member Since: 27 Jul 2021
Location: London
Posts: 3236

United Kingdom 2012 Range Rover Vogue 4.4 V8 Orkney Grey

Are they seized? 2012 TDV8 Vogue (L322)

Post #686748 29th Feb 2024 9:29am
View user's profile Send private message View poster's gallery Reply with quote
mgrover



Member Since: 03 May 2020
Location: Leeds
Posts: 399

United Kingdom 2011 Range Rover Vogue TDV8 Santorini Black

my rear left is yeah, currently driving around with lovely metal on metal.

ive got the full compliment at the moment to basically redo all the suspension of the rear with fresh pads/discs.

so seemed sensible to refurb the calipers. Its actually a sport Sad

Not anymore, 4.4 TDV8 now Very Happy

Post #686751 29th Feb 2024 9:56am
View user's profile Send private message View poster's gallery Reply with quote
JayGee



Member Since: 27 Jul 2021
Location: London
Posts: 3236

United Kingdom 2012 Range Rover Vogue 4.4 V8 Orkney Grey

It's not a difficult job with the right tools although depends on how badly the piston is siezed in the bore and if there is any corrosion to the bore. Do you have a compressor to blow the pistons out? 2012 TDV8 Vogue (L322)

Post #686758 29th Feb 2024 12:07pm
View user's profile Send private message View poster's gallery Reply with quote
mgrover



Member Since: 03 May 2020
Location: Leeds
Posts: 399

United Kingdom 2011 Range Rover Vogue TDV8 Santorini Black

i do have a compressor, so should be simple enough, is it worth checking them, if the corrosion isnt too bad to clean them down/respray then fresh piston/seals? and if fooked then replace.

currently i imagine the car will be on stirrups for a few weeks anyways. Its actually a sport Sad

Not anymore, 4.4 TDV8 now Very Happy

Post #686759 29th Feb 2024 12:09pm
View user's profile Send private message View poster's gallery Reply with quote
DrRob



Member Since: 16 Apr 2015
Location: Petersfield, Hampshire
Posts: 4303

United Kingdom 2011 Range Rover Vogue SE TDV8 Buckingham Blue

Threw mine in the bin and replaced with new TRW ones from site sponsor Advanced Factors
Discount code AF4LRP
Thumbs Up Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------

Post #686760 29th Feb 2024 12:24pm
View user's profile Send private message View poster's gallery Reply with quote
mgrover



Member Since: 03 May 2020
Location: Leeds
Posts: 399

United Kingdom 2011 Range Rover Vogue TDV8 Santorini Black

its tempting but close to 400quid vs like 60quid and a couple of hours work

especially when i can throw that 400quid at the subframe bushings Its actually a sport Sad

Not anymore, 4.4 TDV8 now Very Happy

Post #686763 29th Feb 2024 12:38pm
View user's profile Send private message View poster's gallery Reply with quote
JamesDarby



Member Since: 29 Sep 2021
Location: Rugby
Posts: 24

United Kingdom 2011 Range Rover Autobiography TDV8 Buckingham Blue

I just rebuilt my rear callipers and its not a difficult job with new pistons. (With new Brembo disks and pads). The seized one would not blow out with air.
When its still on the car, remove the pads and use the brake pedal to push the piston out a reasonable way. Don't go too made and push it all the way out a the fluid will go everywhere.

To get mine out I had to get a large stilson wrench on the piston and managed to get it to rotate. Then rotated and pulled with a pair of mole grips on the pisiton.

After bleeding I pushed hard on the pedal and the small bit of solid pipe on the flexible on the top wishbone burst!

So I was luck it happened then and not when I'm towing the caravan in a few weeks.

So I would change the flexible on both sides too if they look a little rusty.

Oh and isn't the pad wear indicator the worse design ever. Whoever though of hiding the connector inside a box up behind the wheel arch plastic. 2011 Range Rover Autobiography TDV8 Buckingham Blue

Post #686770 29th Feb 2024 1:16pm
View user's profile Send private message View poster's gallery Reply with quote
mgrover



Member Since: 03 May 2020
Location: Leeds
Posts: 399

United Kingdom 2011 Range Rover Vogue TDV8 Santorini Black

think ama change the brake pipes too.

what is the word on the street on em? get oem or suffer type deal or will after market do? Its actually a sport Sad

Not anymore, 4.4 TDV8 now Very Happy

Post #686777 29th Feb 2024 2:00pm
View user's profile Send private message View poster's gallery Reply with quote
Wiltshire130



Member Since: 05 Aug 2023
Location: Wiltshire
Posts: 23

United Kingdom 2018 Range Rover Autobiography 5.0 SC V8 Corris Grey

Definetly change the brake pipes - mine were ready to fracture when I took it all apart.
An alternative method it you already have the calipers removed and compressed air will not move the pistons is to screw an M10 x 1 grease nipple in to where the bleed nipple goes and with the inlet sealed off (mole grips on a rubber section - you're going to change them anyway) pump grease in. This will push the piston out without too much effort. L405 2018 5.0 S/C

Post #686808 29th Feb 2024 5:57pm
View user's profile Send private message View poster's gallery Reply with quote
mgrover



Member Since: 03 May 2020
Location: Leeds
Posts: 399

United Kingdom 2011 Range Rover Vogue TDV8 Santorini Black

is there a particular brand or best to just grab some from dealers? Its actually a sport Sad

Not anymore, 4.4 TDV8 now Very Happy

Post #686812 29th Feb 2024 6:33pm
View user's profile Send private message View poster's gallery Reply with quote
Ramblin Man



Member Since: 05 Apr 2022
Location: Southsea
Posts: 276

England 2012 Range Rover Vogue 4.4 V8 Buckingham Blue

mgrover wrote:
its tempting but close to 400quid vs like 60quid and a couple of hours work

especially when i can throw that 400quid at the subframe bushings


AUTODOC do regular offers on TRW branded rear calipers. I saw these last week at around the £90 mark ( each ) after a 45% discount. Perhaps, keep/ refurb the carriers and traveler pins and fit a pair of new ones at that price. TDV8 4.4 2012

Post #686813 29th Feb 2024 6:59pm
View user's profile Send private message View poster's gallery Reply with quote
DrRob



Member Since: 16 Apr 2015
Location: Petersfield, Hampshire
Posts: 4303

United Kingdom 2011 Range Rover Vogue SE TDV8 Buckingham Blue

mgrover wrote:
its tempting but close to 400quid vs like 60quid and a couple of hours work

especially when i can throw that 400quid at the subframe bushings


Mine were a fraction of that price Shocked Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------

Post #686823 29th Feb 2024 7:58pm
View user's profile Send private message View poster's gallery Reply with quote
Ramblin Man



Member Since: 05 Apr 2022
Location: Southsea
Posts: 276

England 2012 Range Rover Vogue 4.4 V8 Buckingham Blue

FYI : TRW branded Rear Calipers are discounted on AutoDoc today to ~£90 each. That’s a 70% discount!

Right : https://m.autodoc.co.uk/trw/2185309

Left : https://m.autodoc.co.uk/trw/2185308

Use code : AC110673399 to get additional £10 off ( only valid for today )


Note: I have no association with auto doc other than being a customer. TDV8 4.4 2012

Post #687124 4th Mar 2024 9:47am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
fullfatrr.com RSS Feed - All Forums


Switch to Mobile site