Home > Maintenance & Mods (L322) > Bilstein CVD front shocks |
|
|
Epson Green Member Since: 20 Mar 2021 Location: Sutton Coldfield Posts: 110 |
Is there a particular reason for wanting Bilstein?
|
||
20th Nov 2023 11:09pm |
|
GraemeS Member Since: 06 Mar 2015 Location: Wagga area Posts: 2459 |
I fitted Bilstein front struts and rear shocks ex UK because they were considerably cheaper than LR ex UK although still quite expensive. The struts were fitted with Dunlop air-springs. |
||
21st Nov 2023 2:22am |
|
Faukstad Member Since: 27 Dec 2021 Location: Oppland Posts: 63 |
No real reason tbh, only personal preference. Bilstein are a dedicated suspension company, only dealing with that. BorgWarner/Deplhi make everything from clutch plates to alternators. |
||
24th Nov 2023 7:33pm |
|
GraemeS Member Since: 06 Mar 2015 Location: Wagga area Posts: 2459 |
Be careful - Bilstein rear air-springs are the shorter variety used on earlier L322s with shorter rear shocks and will split open on MY07-09 TDV8 and all MY10-12 vehicles if the vehicle is used at off-road height on rough ground where the shocks can fully extend. |
||
24th Nov 2023 7:51pm |
|
Faukstad Member Since: 27 Dec 2021 Location: Oppland Posts: 63 |
Thanks Graeme, good tip!
|
||
24th Nov 2023 7:55pm |
|
GraemeS Member Since: 06 Mar 2015 Location: Wagga area Posts: 2459 |
Longer non-CVD rear shocks were fitted to TDV8 only versions of MY07-MY09 and all CVD rear shocks are the same, longer length.
|
||
24th Nov 2023 8:37pm |
|
Faukstad Member Since: 27 Dec 2021 Location: Oppland Posts: 63 |
Allright, gotcha.
|
||
24th Nov 2023 9:16pm |
|
Faukstad Member Since: 27 Dec 2021 Location: Oppland Posts: 63 |
Advanced Factors only have the Dunplo rear bags.
|
||
24th Nov 2023 9:33pm |
|
GraemeS Member Since: 06 Mar 2015 Location: Wagga area Posts: 2459 |
I bought genuine LR rear air-springs from Island4x4. |
||
25th Nov 2023 12:05am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis