i hope you have the loom for the camera as you can not buy it on its own i tried V8 facelift Range Rover Autobiography 22" wheels.
1976 Harley Davidson Iron Head Sportster

Martin wrote:

nbunney wrote:

can make some leads up for postage costs and forum donation.

daveo wrote:

i hope you have the loom for the camera as you can not buy it on its own i tried

3R10 wrote:

daveo wrote:

i hope you have the loom for the camera as you can not buy it on its own i tried

So, is it sold?

Interesting. I have the spoiler and built in camera as sourced from the bay, but no loom. I will hunt around as well and see if I can find anything. Tom

Current Drive
2011 4.4 TDV8 Autobiography - Santorini Black - Ivory Leather

Previous Drives
2004 Model Vogue Td6 (Touchscreen) - Java Black - Parchment Leather
1994 RR Classic 3.9 V8 Soft dash - Niagara Grey - Grey Leather
1972 Series III SWB Safari - Green (Hand Painted) - Black Plastic

dont think you need a loom ...the cable between the camera and the rear screen input is just normal video cable you get on house hold cctv..this is the cable i used when i fitted a camera to my smax and it worked fine..obviously the power cable from the spoiler/camera will go to your reverse lights..

I'm really glad I stumbled across this forum! Thanks for the info. Tom

Current Drive
2011 4.4 TDV8 Autobiography - Santorini Black - Ivory Leather

Previous Drives
2004 Model Vogue Td6 (Touchscreen) - Java Black - Parchment Leather
1994 RR Classic 3.9 V8 Soft dash - Niagara Grey - Grey Leather
1972 Series III SWB Safari - Green (Hand Painted) - Black Plastic

I have fitted a rear camera on my MY2005 touch screen RR, but I did not fancy doing the wiring.
Booked in at local indy LR dealer only to be told the configuration on my RR could not be changed to get camera to switch when in reverse.
Is this because he will be using the dealer diagnostic? Am I right in thinking that the faultmate or other diagnostic can change this config
If so is there anyone In the Banbury area that could enable it for me for a fee?

thanks

probably about an hour away from you is CTC ,who are one of our sponsors...give Craig a call, he'll help you out.. ... - .- -.




Y. O. L. O.
.

cheers Stan

Just an update to those doing the retrofit, you can activate the rear camera mode on the IID tool. So that when you put the car in reverse the nav unit switches to the camera automatically! Tom

Current Drive
2011 4.4 TDV8 Autobiography - Santorini Black - Ivory Leather

Previous Drives
2004 Model Vogue Td6 (Touchscreen) - Java Black - Parchment Leather
1994 RR Classic 3.9 V8 Soft dash - Niagara Grey - Grey Leather
1972 Series III SWB Safari - Green (Hand Painted) - Black Plastic

thanks for that info Tom  ... - .- -.




Y. O. L. O.
.

Hi, Flashman
Did you (or anyone else) crack this issue and retro-fit a reversing camera to a 2005--> Fatty with the Touchscreen MOST system?
If I have understood correctly, the camera feed for this model goes directly into the Head Unit, which has to be enabled. I have a IID tool so this should not be a problem.
But what about the choice and location of the (NSTC) camera, and how to run the cable to the Head Unit? I’d be interested in hearing of the experiences of anyone who’s done this.
Thanks in advance  It's "bébéchoon", ackcherly, with accents. 'Steve' to my chums.
20 years ownership of Solihull products, ALL GONE NOW, sniff!
Current motor: Suzuki S-Cross 4WD auto, 1.4 petrol. Oh so reliable! 7 years now and no problems. Oh, all right then, a leaking shocker replaced under guarantee.
Previous:
TD6 HSE L322 Auto FF
2.5 TDi 4-door Classic
Disco II
And my 1st Rangie: in 1995, a 2-door VM 2.5 diesel Classic
Not to mention the Lada Niva before those. (I said not to mention it!)