hi all ,
i tried the left to right ,left to right ,left to right on the steering wheel but to no avail .
I then used the rsw software as a last ditch attempt . It didnt work ,so i thought what the hell i tried recoding the steering angle sensor . Followed the instructions etc then switched the engine off then re started and hey presto the lights went out . Accessed the abs module and no faults found . Also the hdc inactive warning went out .
I also managed to access the eas module . It recorded that the air receiver pressure drop when filling ,i cleared that and the eas hold light has gone out . Air suspension lifts on the back but nothing on the front .only way i can get the front to lift is by using the rsw to "lower All" .when the rear drops the front lift i stop the depresuusisation disconnect the rsw and the rear rises.
Trying to solve this one but at least now the abs shows no faults and i can access the eas module even if it still records can bus error
one step ,rather one fault at a time ,slowly slowly sort em out
|