Ha ha, you spotted the low fuel.. it is not normally like that but at the moment it is in the dealers having baffles fitted inside the fuel tank to stop the fuel sloshing around and I had to run it near empty for them to do it. Land Rover are paying for the work. 2016 AB SDV8 Barolo black

I try to avoid getting below 1/4 tank if possible, it just makes me feel better looking at a full tank First time FFRR owner

OK team, I now have the newer version of the remote control for the FBH, I need to try and find the correct fuse to pull.

I'd like the option to use the Webasto app to remote start it, I have mailed them and it appears I was trying to use the QR code on the heater but I need to use the QR code on the TCON2 bluetooth module that looks like the picture. Does anyone have an idea where it will be located?

 First time FFRR owner

The earlier one was behind the OS 'D' pillar trim, so possibly check there first. The fuse should be fuse 1 on the fuse box behind the OSR side trim.

cheers phoenix, I may get chance on sunday to have a look at this, ive just found a YouTube video with someone programming a fob pulling fuse 27 in the passenger side glove box fuses First time FFRR owner

The wiring diagram shows fuse 1 in the fusebox behind the OSR boot trim panel...
You should be able to get to the electrical connector on the receiver so it may be easier to just pull that & reconnect rather than playing fusebox bingo.

I received the remote I purchased from phoenix. Managed to pair by removing the plug from behind D pillar see photo…

Click image to enlarge

is that in the section near the auxiliary battery or did you have to take off the pillar trim? I'm rather heavy handed when removing those plastic clips and things. Its lashing it down today so not going to get chance til next weekend to look at mine First time FFRR owner

Hi Arch,

No you can take off just the full panel that covers auxiliary battery/fuse box etc…..and then you can look up the D pillar and you can see the receiver. No need to remove D pillar trim.

When it comes to removing connector 3 wires, you need to press the Blue tab and then pull the connector. See attached photo and circled tab.

Click image to enlarge

you're a star, thank you. I'm hoping for a window in the rain, that should only take ten minutes First time FFRR owner

Watching with interest  2018 SE SDV8 4.4 Byron Blue