Afternoon,

Last edited by DrF on 16th Sep 2023 9:46pm. Edited 2 times in total

Can't guess what that would be but good luck, hope it's a cheap fix....  Pete

__________________________________________________
2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior
2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Parchment over Navy Interior. Sold
2012 L322 Autobiography 5.0 Supercharged Ipanema Sand, Jet Interior. Sold
2002 L322 Vogue 4.4 V8 Epson Green, Ivory over Aspen Interior (Fatty Offroader) Sold
-Click for Project Fatty off roader-

Last edited by Haylands on 19th Jul 2023 4:28pm. Edited 1 time in total

May be worth checking / cleaning the earth terminals located behind the front wheel arch liners - a few earth cables terminate here and due to the location, can suffer corrosion / bad earthing.

The liners are easy to remove, providing easy access to inspect 👍 Jonathan

2007 Defender 90 XS Hardtop

By the way I have to say the garage have been brilliant.

Last edited by DrF on 16th Sep 2023 9:46pm. Edited 1 time in total

The alternator is driven by an external belt. The timing chains are internal. While technically connected as part of the entire system, you cannot put an alternator out of timing alignment as it is not timed to the engine.

My alternator failed last year due to oil leaking into it from a valve cover leak. I was able to charge the main battery and drive it for about 15km before experiencing similar symptoms as you. It was a PHEV for a few weeks.

Perhaps the new alternator failed due to a similar issue as my 2013? Dan. 🇨🇦 2013 L405 5.0 SCV8

Thanks Bora

It could be a simple case of an incorrectly fitted connector. I imagine that to replace the alt you need to unplug and remove a few things first. If some of those connectors are not fully home you could get rough running. Things like camshaft sensors, manifold pressures etc etc all affect the timing and engine mgmt decisions, and even just one missing can be enough for it to throw a wobbly.

That being said engine diagnostics should pretty quickly show up issues as pointers to look for. V8 or else ...

Thanks Fisha,

They have said its throw cam shaft errors, I assume that is cam sensors maybe, now wont turn over, its sitting waiting its turn in the garage.


DrF