Hi all my local Kwik fit, usually good for wheel allignments say they can’t do it on my 2018 L405 because they need a special tool which they don’t have? Are they talking ? Or is this a genuine issue?

Rang merityre and they don’t believe anything is needed? But can’t fit me in for a few days?

Any ideas?

Thanks
Tom

You need to put the suspension into tight tolerance mode I believe (or at least on the L322 you do). I wonder if they don’t have diagnostics to do that? 2002 4.6 Vogue SE - Alveston Red with Lightstone Leather
2007 Range Rover Supercharged in Java Black with Ivory Leather
2012 Range Rover 5.0 SC Autobiography in Indus Silver with Jet/Ivory Interior
2012 Range Rover 4.4 TDV8 Autobiography in Baltic Blue with Sand Interior

Post deleted.

Last edited by Red Merle on 26th Jun 2023 8:33pm. Edited 1 time in total

Try choose one with the hunter alignment system.

See if you can find another wheel alignment specialist. Steer clear of kwikfit (sorry for the pun).

you can find a kwik fit that does the hunter hawkeye alignment online..

they did mine and very well to. ... - .- -.




Y. O. L. O.
.

I see you’re in West Sussex
Take it to Glenrands in Passfield. Proper kit, proper knowledge and proper customer service.
Tell them I sent you 👍 Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------

www.glenrands.co.uk Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------

See my post below, the latest Hunter system is called “WinAlign”

https://www.fullfatrr.com/forum/topic67178.html

Obvs location is no good for you!  “If it ain’t broke, don’t fix it” -where’s the fun in that?

Great to see it happening “before your eyes” and no paranoia about the WD40 trick by shady operators…  “If it ain’t broke, don’t fix it” -where’s the fun in that?

Mr Tyre did mine, after rear sub-frame swap, did a great job, drives spot on, and central...

Click image to enlarge

Click image to enlarge

Click image to enlarge

Hi, you can try

https://alignmycar.co.uk/

you should be able to find some one with hunter’s equipment here. Maybe worth checking they have equipment to put in tight tolerance mode before booking in.
Hope it helps.

Always ask “How do you put it in Tight Tolerance Mode?”
If they look at you blank or dismiss it, walk away. Quickly  Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------

DrRob wrote:

I see you’re in West Sussex
Take it to Glenrands in Passfield. Proper kit, proper knowledge and proper customer service.
Tell them I sent you 👍

Back when I had my Sport I used these and they were spot on. So I highly recommend. https://thetyreshop.com/ L405 P400e Autobiography (MY2020)... Silicon Silver / Espresso