Home > Maintenance & Mods (L405) > Removal of L405 rear seats to accommodate large dogs? |
|
|
James W Member Since: 29 Nov 2009 Location: Riyadh Posts: 292 |
I'd be hoping that these come to the UK soon
|
||
6th Jun 2023 11:56am |
|
Nasher Member Since: 30 Sep 2009 Location: Down South Posts: 40 |
It certainly has a completely flat loadspace:
And this spec looks like it could be fun |
||||
6th Jun 2023 7:20pm |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35312 |
... - .- -.
|
||
6th Jun 2023 7:41pm |
|
Mikeerhymes Member Since: 01 Sep 2018 Location: Manchester Posts: 20 |
I don’t suppose you have any pointers to get started? I’m struggling to find any guides to get the rear exec seats removed. There doesn’t appear to be the same 2 clips underneath that are on the standard seats? I have a seat that won’t move forwards/back but recline is ok. I can see a red connector unplugged 🤔 |
||
16th Jul 2024 11:48am |
|
Mikeerhymes Member Since: 01 Sep 2018 Location: Manchester Posts: 20 |
Following up, they are the same clips that hold the exec seat in place. As the seat wouldn’t move forwards, it was impossible to get close to the clip as the seat base is so deep. A gentle pull on seat pulled the clips off the seat rather than unclipping from the frame. All sorted now.
|
||||
1st Aug 2024 2:17pm |
|
JDGeorgia Member Since: 11 Oct 2023 Location: Atlanta GA Posts: 154 |
I didn't read all the replies - so apologies if this was mentioned before...
|
||||
5th Aug 2024 8:49pm |
|
supershuttle Member Since: 20 Mar 2011 Location: Lancashire Posts: 3796 |
Funny enough that occurred to me, just sling in a suitably cut sheet of ply and lose a few inches of headroom. Why make it more complicated than it needs to be. Geoff |
||
5th Aug 2024 10:21pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis