Home > Maintenance & Mods (L405) > L405 - Paint code for deployable steps |
|
|
jettec Member Since: 16 Jul 2013 Location: Melbourne Posts: 229 |
Hi, I have they factory deployable steps. They are not painted mine are aluminium that have been anodised or plated in the black color.
|
||
25th Oct 2022 10:48pm |
|
Gremlin500 Member Since: 11 Mar 2022 Location: Newcastle, UK Posts: 1415 |
I painted mine with black Hammerite Smooth, after masking off the silver bits. Not perfect, due to aluminium corrosion under the surface, but OK for now until I can figure out how to remove and send to the blasters. Removing bolts and hammering away with a mallet wouldn’t budge them 1mm The white is likely aluminium oxide rather than primer, yes that’s “rust” in aluminium-speak.
|
||
26th Oct 2022 2:38pm |
|
jettec Member Since: 16 Jul 2013 Location: Melbourne Posts: 229 |
On the topic of roof access restricted, the side steps are quite High Tech and have sensors under the car that can detect obstacles. So the steps won't come out onto a rock or the likes of an obstruction and damage steps.
|
||
26th Oct 2022 10:56pm |
|
Kot Member Since: 10 Mar 2021 Location: broadland Posts: 1194 |
Car wash shock horror 2018 SE SDV8 4.4 Byron Blue |
||
27th Oct 2022 7:13am |
|
JCW Member Since: 13 Apr 2013 Location: Cotswolds Posts: 861 |
I’ve used truck bed liner paint on these previously, with excellent results - a very durable and slightly textured finish.
|
||
27th Oct 2022 7:19am |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35262 |
i wrapped mine with black satin wrap... ... - .- -.
|
||
27th Oct 2022 7:34am |
|
Edgey808 Member Since: 17 Apr 2016 Location: U.K. Posts: 48 |
Thanks for the suggestions Gents!
|
||
27th Oct 2022 9:55am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis