![]() | Home > Maintenance & Mods (L322) > Door Card Black & Silver "Land Rover" Badges |
![]() ![]() |
|
|
Haylands Member Since: 04 Mar 2014 Location: East Yorkshire Posts: 8508 ![]() ![]() ![]() |
I had these on the Autobiography and really liked them so thought I would get a set for the Vogue SE but then I saw the price...
Prize the rear out with a trim tool then remove,
The strap comes out pretty easily...
The problem is they are domed so you have to grind them flat, I used a powerfile held in the vice which worked OK, it's the type of plastic that goes "hairy" (See pic below) so a quick blast of a heat gun makes them look nice again...
Stick the new badges on and replace.... I may paint the original part black or silver to finish it off but I think they look pretty good anyway... (I had to buy a minimum amount so have two sets of 4 left over, PM me if interested) Pete __________________________________________________ 2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior 2012 L322 Autobiography 5.0 Supercharged Ipanema Sand Sold 2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Sold 2002 L322 Vogue 4.4 V8 Epson Green (Fatty Offroader) Sold -Click for Project Fatty off roader- |
||||||||||||||
![]() |
|
Baltic Blue Member Since: 13 Aug 2015 Location: North Wales Posts: 3803 ![]() ![]() ![]() |
They certainly look smart Pete, but I am not sure how tough they will be, especially on the drivers door..
|
||
![]() |
|
Phoenix Member Since: 16 May 2022 Location: Gone Posts: 1631 ![]() ![]() |
I like those - mind sharing where you got them done? I'd prefer them in the more traditional green & gold. |
||
![]() |
|
Haylands Member Since: 04 Mar 2014 Location: East Yorkshire Posts: 8508 ![]() ![]() ![]() |
PM Sent.. Pete
|
||
![]() |
|
Haylands Member Since: 04 Mar 2014 Location: East Yorkshire Posts: 8508 ![]() ![]() ![]() |
Mike, I thought they might do that but they are below the level of the door card so they won't get knocked off, more like pushed on if you lean on them...
|
||
![]() |
|
Phoenix Member Since: 16 May 2022 Location: Gone Posts: 1631 ![]() ![]() |
The black badges are about £12 ea. (EKA000010PVA) they'd probably look better than the original Ivory ones as a backing - which are a fair bit more TBH! |
||
![]() |
|
Phoenix Member Since: 16 May 2022 Location: Gone Posts: 1631 ![]() ![]() |
I had some green/gold ones made up, after grinding and polishing the original badges flat, I tried one on the light backing, which didn't look 'right' to me so I used a black sharpie, which looked like someone had coloured the edges with a black sharpie....
|
||||||||
![]() |
|
Haylands Member Since: 04 Mar 2014 Location: East Yorkshire Posts: 8508 ![]() ![]() ![]() |
Top job, looks nice... |
||
![]() |
|
Phoenix Member Since: 16 May 2022 Location: Gone Posts: 1631 ![]() ![]() |
Thanks - and thanks for the info on ordering |
||
![]() |
|
Haylands Member Since: 04 Mar 2014 Location: East Yorkshire Posts: 8508 ![]() ![]() ![]() |
Yeah, I think I prefer the green, especially with the drop shadow, but mine has black badges all over... |
||
![]() |
|
Phoenix Member Since: 16 May 2022 Location: Gone Posts: 1631 ![]() ![]() |
Mine did when I bought it, slowly changing back to the green/gold - keeping the SC grille though! |
||
![]() |
|
vs322 Member Since: 08 Apr 2020 Location: Athens Posts: 596 ![]() ![]() ![]() |
£205! Holy crap! I'm sure I didn't pay that much for mine a year and a half ago. What a rip-off. |
||
![]() |
|
nicedayforit Member Since: 11 Jun 2011 Location: Beside the Solway Posts: 3979 ![]() ![]() ![]() |
Are the badges needed the same size as the steering wheel badge by any chance? |
||
![]() |
|
Haylands Member Since: 04 Mar 2014 Location: East Yorkshire Posts: 8508 ![]() ![]() ![]() |
No, I hoped that but they are a different size.... Pete
|
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
