Advertise on fullfatrr.com »

Home > Technical (L322) > Range Rover L322 ABS issue
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Wolf63



Member Since: 12 Jun 2014
Location: Visp
Posts: 4

Switzerland 
Range Rover L322 ABS issue

Hello all,

I have a problem with my Range Rover L322 model year 2003 with the 4.4 V8.

The Range Rover has the following issues:
DSC ABS HDC and air suspension are without function.

In the morning the Range Rover works fine but after a few kilometers the above mentioned systems suddenly fail.


I have read out with the Bearmach Tool this gave the following errors:
- DTC 52 Rotation rate sensor line
- DTC 5A Short power failure

We have already changed the rotation rate sensor

Post #611781 6th Nov 2021 8:42am
View user's profile Send private message View poster's gallery Reply with quote
vs322



Member Since: 08 Apr 2020
Location: Athens
Posts: 584

Greece 2004 Range Rover HSE 4.4 V8 Java Black

This sounds like the yaw rate sensor. While you cannot remove it without taking the cubby and center console apart, there is a way to access the connector. Try unplugging and reconnecting as follows:

Under the rear AC vents, there is a plastic cover secured with 4 plastic pins
Gently remove it and shine a light in there. At the bottom, the yaw rate sensor can be seen. Its connector is right at the edge of the carpet. Just pull on it backwards bending the carpet a bit to disconnect. The plug it back in.

Otherwise, I would also be looking for vacuum leaks especially the PCV itself as well as the hose from the PCV to the brake cylinder. Hope this helps.

Post #611879 7th Nov 2021 9:21am
View user's profile Send private message View poster's gallery Reply with quote
nicedayforit



Member Since: 11 Jun 2011
Location: Beside the Solway
Posts: 3973

England 2004 Range Rover Vogue Td6 Giverny Green

Have you considered a low voltage problem for whatever reason?

Post #611902 7th Nov 2021 1:06pm
View user's profile Send private message View poster's gallery Reply with quote
Wolf63



Member Since: 12 Jun 2014
Location: Visp
Posts: 4

Switzerland 

Hello Thank you for your reply!

The yaw rotation sensor is already new!
Leaks I have currently found no.
The error is called rotation rate sensor line!

The voltage is also good the battery was already replaced before the error came up.

Post #611926 7th Nov 2021 6:54pm
View user's profile Send private message View poster's gallery Reply with quote
vs322



Member Since: 08 Apr 2020
Location: Athens
Posts: 584

Greece 2004 Range Rover HSE 4.4 V8 Java Black

Try unplugging, cleaning contacts and reconnecting. Then clear any registered faults. Might not be the cause but it's easy enough and therefore worth a try...

Post #611929 7th Nov 2021 7:00pm
View user's profile Send private message View poster's gallery Reply with quote
nicedayforit



Member Since: 11 Jun 2011
Location: Beside the Solway
Posts: 3973

England 2004 Range Rover Vogue Td6 Giverny Green

The reason l mentioned possible low voltage is that low voltage fairly commonly causes the problem you are experiencing ie abs, dsc, hdc and air suspension faults all together. Although your battery is good it is a possibility that you have an intermittent connection fault causing your problems.
As vs322 has mentioned it's worth disconnecting, cleaning and reconnecting and see what happens.
I would be inclined to start with the battery and alternator connections. Thumbs Up

Post #611932 7th Nov 2021 7:49pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
fullfatrr.com RSS Feed - All Forums


Switch to Mobile site