Going to have a look at an L405 Vogue SE tomorrow. From this picture, can anyone tell if the wheels fitted are genuine?



I've read the wiki on these but can't tell with my untrained eyes!

Thanks in advance for any tips.

They don't look quite right for turbines.

Genuine ones are diamond cut and those spokes look a bit "fat". One spoke should be very clearly thinner than the other.

Do you know what size they are? I think genine turbines were 21 or 22", never 20's. 2021 D350 Fifty Edition - Carpathian Grey
2017 4.4 SDV8 Autobiography (2021-2024) - Santorini Black
2012 4.4 TDV8 Westminster (2016-2021) - Santorini Black

They're 22".

The spec list on Autotrader lists one of the options as 22" turbines. Perhaps they've had a standard refurb with no diamond cut faces.

I think they are genuine, but as above - have been re-finished in silver - none came from the factory finished like that, but a diamond cut refurb is more expensive and a lot of places can't even do it.

It does look like the spokes are slightly different thicknesses - it's more obvious with a diamond cut face, but if you look carefully....

It also depends on the angle - if you look at the spokes here, they look thinner & fatter at different angles.

i think the only sure way is to have a look on the inside of the spokes to confirm the LR product codes.. ... - .- -.




Y. O. L. O.
.

Before you drive it ask them to please put the right number of wheel nuts on the wheel......

As Stan says, best way to tell is to look on the back.... they seem to have tpms though so chances are decent.... There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
Fiat 500x 1.4 multiair Lounge 2015
2010 LR D4 Commercial 2.7 TDV6

Got a full powder coat and diamond cut refurb undertaken to my wheels. Really happy with the results.

So I’m happy that they are genuine. It seems the selling garage just undertook a cheap silver refurb rather than an OEM style diamond cut finish.

Click image to enlarge

Click image to enlarge

very nice  ... - .- -.




Y. O. L. O.
.

very nice indeed! Sold - Bell a 2015 MY16 Loire Blue Autobiography 4.4 SDV8
Previously George a 2007 MY07 Java Black VSE 3.6 TDV8
Previously a 04 MY04 Defender 90

Thank you for your positive responses gents.

I’ve seen some shocking refurbs out there such as this on Ebay!!

Click image to enlarge

They have gone a bit mad with the diamond cutter. Set at 10mm instead of 1mm  Paul

2014 Range Rover vogue se 4.4sdv8 Loire Blue
1992 Range Rover Vogue LSE 4.2 Ardennes green

[quote="kungfupanda"]Got a full powder coat and diamond cut refurb undertaken to my wheels. Really happy with the results.

So I’m happy that they are genuine. It seems the selling garage just undertook a cheap silver refurb rather than an OEM style diamond cut finish.

Out of interest what did the refurbishment cost? I’m just going through the process of getting my wheels tidied up.

£440 for a drop off service. They had the car, removed wheels, took the tyres off. Full acid strip down, repair any kerbing then powder coat and diamond cut followed by lacquer. It took a total of three days.

I’m up North though so things might be a bit more expensive down South.

Thanks. I’m waiting on a price from a trusted body shop locally but what I’m after is pretty much what you described

I’ve had quotes of up to £720 from The Wheel Specialist to £320 from a back alley place. Anywhere around £500 should be fair.