![]() | Home > Maintenance & Mods (L405) > Range Rover hood letters |
![]() ![]() |
|
|
Zebedee Member Since: 09 Jun 2016 Location: Cheshire/South Manchester Posts: 387 ![]() ![]() ![]() |
Cut the template between each letter, and then put the template pieces over the existing letters on the bonnet then tape together - hey presto, perfect spacing. Current:
|
||
![]() |
|
funnyguy1 Member Since: 11 Mar 2010 Location: Sun Valley, Idaho Posts: 387 ![]() ![]() |
Thanks Z! I'll give it a try. |
||
![]() |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35508 ![]() ![]() |
evoques are smaller in size so it possible you have a set for that vehicle.. ... - .- -.
|
||
![]() |
|
funnyguy1 Member Since: 11 Mar 2010 Location: Sun Valley, Idaho Posts: 387 ![]() ![]() |
Hi Stan, The letters are the same size but the spacing is closer. Is that what you mean?
|
||
![]() |
|
mjdronfield Member Since: 04 Nov 2011 Location: Derbyshire Posts: 7877 ![]() ![]() ![]() |
Are you sure the ones already on are correct?
|
||
![]() |
|
funnyguy1 Member Since: 11 Mar 2010 Location: Sun Valley, Idaho Posts: 387 ![]() ![]() |
Yes they appear to be correct. As I mentioned, the dealer installed the letters over the new 3M clear bra but installed them about 3/4" off center. I also checked with my wife's 2014 and they are also correct. Just have to cut template as D suggested and see if I can get them straight. Dealer said they would redo if I brought down but its a 3 hour drive. Mike |
||
![]() |
|
Flyingfocrs Member Since: 18 Oct 2016 Location: On the croft with the horses Posts: 93 ![]() ![]() ![]() |
I’ve done this twice now with the same result, my rear template was embossed “sport”
|
||
![]() |
|
funnyguy1 Member Since: 11 Mar 2010 Location: Sun Valley, Idaho Posts: 387 ![]() ![]() |
Letters came out great! Cut template and then took measurements of all letters from the hood of my wife's bonnet. Thank you all again for your help!
|
||||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
