Home > Technical (L322) > OBD Scanners/Readers Info |
|
|
dan_uk_1984 Member Since: 12 Nov 2008 Location: Bude, Cornwall Posts: 4014 |
I think if someone is using the site to promote their wares then they should have to pay for the privilege, after all they are making money that they wouldn't have otherwise made had it not been for the site. In the mean time the site has to find its own money to stay up and running.
|
||
19th May 2009 5:35pm |
|
Larry Member Since: 03 Dec 2008 Location: East Midlands Posts: 262 |
Site rules are site rules. We all agreed to them when we signed up.
|
||
19th May 2009 5:48pm |
|
Larry Member Since: 03 Dec 2008 Location: East Midlands Posts: 262 |
Dan, Although I am guilty in part of digressing this thread, I agree (Sorry!).
|
||
19th May 2009 5:56pm |
|
Dixy Member Since: 09 Apr 2009 Location: Somerset Posts: 1092 |
This thread is of interest to me partly because of my miss fire thread problems. I think any one willing to give good advice should be welcome, at what point they take the is down to the mods. I have a totaly mapable ECU on Elise and the softwear to change it but am well aware of my limmitations. The basic tool is all I need but would wellcome help understanding what it is telling me. letters not necessarily in the right order |
||
19th May 2009 6:11pm |
|
dan_uk_1984 Member Since: 12 Nov 2008 Location: Bude, Cornwall Posts: 4014 |
Just sent you a PM on the matter |
||
19th May 2009 6:31pm |
|
Dixy Member Since: 09 Apr 2009 Location: Somerset Posts: 1092 |
Ping letters not necessarily in the right order |
||
19th May 2009 7:09pm |
|
BBS SPY Member Since: 20 Apr 2009 Location: Limassol Posts: 101 |
It really is scraping the bottom of the barrel to imagine that post as seriously trying to commercially promote our product, especially when you know what my promotional posts usually look like That's like comparing a folded sheet of A4 next to a A380. Seriously though, yea it can be an effort, at which i do try very hard, But i am not pretending to be someone i am not or have unbiased opinions in respect of diagnostic equipment. I am not here on this forum to flog our stuff, and if i got out of hand there are those who i would be happy to hear say so. What i meant by my post was that, most everyone who is into Range Rovers knows all about our stuff already. If people ask me something, i will respond and answer as much as i am respectfully able and if it gets a bit more interesting/ inquisitional then Martin knows i am more than happy or willing to do the right thing. So please give me some credit. As well as which as members here have stated, they know the score, they can filter any self praise (which is no praise) out no problem) Typically it is easier for me not to post in such threads as this, and if i chose to participate, i certainly would have not bought up our equipment, but simply offer my related knowledge and understanding as indeed i did. But, imagine if had made a post about you Ken, saying that i thought you did something " ", and in your heart you truly believed it was actually something good that you did, i am really quite sure you would post in response, under any circumstances, mentioning yourself and the good things you have done several times. and probably far less politely and less aggressively than i did in this case. I don't want to argue fight or annoy anyone, or cadge a freebie. I just like to chat about technical stuff, although as many will know, my chatting with other enthusiasts and owners on any forum about technical problems (the ones in A) Larry ) and stuff has, without fail, always resulted in a raft of very beneficial and innovative developments for all owners somewhere further down the line. And ultimately at some point it does justify us in deciding to become a sponsor anyway, and as you have seen, that then causes others to as well. So while we may just be window shoppers here at present, we are potential customers and regular buyers, not the sort you want to be sticking your fingers up to. On that note. Ken, you seem in particular to air some strong views and concerns regarding commercial posting without site sponsorship and you openly suggest that you think I might be seeking to underhandedly posts commercially for free. I understand your concern and your motives for these comments may seem justified to you. However, i will tell you a couple of things you should consider that may well find interesting. 1)) I have already paid for 2 months sponsorship on another of Martins sites at the same time as i Did for D3, but i did not so much as post there even once. 2) When renewing my sponsorships and updating to Banner advertising for six months on D3, i had also initially decided to add sponsorship of this site too. As well as buy a big pile of promotional items at the same time. However i actually decided not to, as a direct result of your jumping to totally the wrong conclusion and firing your very own hostile and unwelcoming response to my first post of general interest here. And just think you could have been well on your way to having my super zooby flash banner advert on here too. Perhaps, i might therefore just remind you of the advice you gave me then, and by the same token, offer the same.
I got Nooooo Problemo with that, and i promise to try my very best to keep my massive BBS soapbox out of site. BTW That was not a typo And thanks to those of you at least willing to give me the benefit of doubt. Now back on topic. Dan, I actually commend you on your post and your efforts to make others aware of any decent well valued OBDII tool, there is a lot of rubbish about, purporting to be better than it is, and anyone can easily waste what little resources some have available on them. This one does look better than average, certainly the best i have seen, and i have seen a few . Can i therefore confirm if it also gives the above P1000 code list by manufacturer facility i have seen on some of the better ones. If not that would be a useful thing that might be possible to add separately. Also I noted on your pictures that the graphics used for the dials in particular are quite something, even got reflections on them to make them seem glossy, which is what i call real attention to detail. Are those graphic files separate? As in have you looked through the files Also are there any other views. 2003 4.4 HSE |
||
20th May 2009 4:17pm |
|
delsilencio Member Since: 08 Apr 2009 Location: toulouse Posts: 116 |
Someone experience with the Bearmachs Hawk Eye?
|
||
1st Jun 2009 11:57am |
|
ken Member Since: 22 Aug 2008 Location: On another forum Posts: 936 |
Last I heard was that the L322 would be ready mid June and I'm defo getting one plus the add on's for the D3 |
||
1st Jun 2009 1:49pm |
|
Larry Member Since: 03 Dec 2008 Location: East Midlands Posts: 262 |
What exactly does the Hawkeye do that the other ODBII readers don't (apart from being marketed for LR's)?
|
||
1st Jun 2009 2:02pm |
|
RRUK Site Supporter Member Since: 08 Jun 2007 Location: UK Posts: 6366 |
As a Moderator I don't want to seem unfair to anyone, individual or commercial and take into consideration the rules and regulations by which we signed up.
|
||
1st Jun 2009 2:57pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis