Hey guys,

I’ve just won on eBay a brand new lower door moulding, the lower panel of the doors on the l322 and the seal that comes with it.

Apparently the seal is loose and just slides on.

You can’t buy these seals separate but has anyone ever removed / replaced one?

I’m going to use the new seal on my existing door panel. Just don’t know if it should be glued or just slid into place?

Daz



[/b] Regards

Daz

-------------------------
2011 (61plate) 4.4 tdv8
sumatra black

previous cars

e46 m3
e53 x5

No one lol? Regards

Daz

-------------------------
2011 (61plate) 4.4 tdv8
sumatra black

previous cars

e46 m3
e53 x5

Yes, I have removed it and put it back on when the plastic part needed new paint.
So you can just slide it into place easily and there will be gap between seal and plastic.
I don't remember anymore the order. Maybe it was first the door, then plastic and the clips that hold the plastic. Just check the other side and you will understand. You don't need glue or anything. Just need to install it correct way.