Home > Technical (L322) > How to determine where coolant leak is coming from |
|
|
Gsxr1250dave Member Since: 20 Oct 2018 Location: London Posts: 890 |
Yes.....tell us which model and engine you have for starters |
||
19th Feb 2020 9:10pm |
|
Blitz Member Since: 18 May 2019 Location: Billys Creek Posts: 33 |
She's a 2008 TDV8 diesel Vogue SE. |
||
19th Feb 2020 9:12pm |
|
dazza1983 Member Since: 19 Feb 2019 Location: southampton, hampshire Posts: 529 |
best way is to buy some coolant dye.. And a ultra violet light
|
||
19th Feb 2020 9:14pm |
|
Gsxr1250dave Member Since: 20 Oct 2018 Location: London Posts: 890 |
What dazza said |
||
19th Feb 2020 9:14pm |
|
Blitz Member Since: 18 May 2019 Location: Billys Creek Posts: 33 |
Thanks, but is there a way I can find out without the dye and ultra violet light (to which I have no idea how to use anyway). Is there a bush mechanic's way of determining the leak? |
||
19th Feb 2020 9:22pm |
|
dazza1983 Member Since: 19 Feb 2019 Location: southampton, hampshire Posts: 529 |
Due is the quickest and easiest way buddy.
|
||
19th Feb 2020 11:07pm |
|
Blitz Member Since: 18 May 2019 Location: Billys Creek Posts: 33 |
Thanks Dazza. I don't have access to dye, other than food colouring. I'm a couple of hours from an auto shop. I put some baby powder all around the engine, in the hope it would highlight any leaks. Filled up the water, then ran for 10 minutes. There was no issue whatsoever. No leaks, no water coming out under the car - nothing. The temp gauge stayed on normal. The engine warning light was on but no messages regarding overheating. I revved her up to about 4000, still nothing. I noticed the radiator hoses didn't feel like there was any water in them - it was easy to squeeze them. (Don't know if that's normal). When I switcher her off, the water was cold in the expansion tank and the hoses were cold. I'm totally lost. |
||
19th Feb 2020 11:34pm |
|
bigbo Member Since: 07 Jul 2014 Location: Derbyshire Posts: 575 |
Hi Blitz
|
||
20th Feb 2020 12:42am |
|
Blitz Member Since: 18 May 2019 Location: Billys Creek Posts: 33 |
Thanks Bigbo.
|
||
20th Feb 2020 1:18am |
|
bigbo Member Since: 07 Jul 2014 Location: Derbyshire Posts: 575 |
Hi Blitz
|
||
20th Feb 2020 1:28am |
|
Blitz Member Since: 18 May 2019 Location: Billys Creek Posts: 33 |
Thanks for your help Bigbo. I'm waiting for it to cool down, then I'll have a go at getting the cover off and see what happens.
|
||
20th Feb 2020 2:01am |
|
bigbo Member Since: 07 Jul 2014 Location: Derbyshire Posts: 575 |
I think your first job is to get the engine cover off so you have visibility. Unfortunately overheating issues need you to work on a hot engine, just be careful.
|
||
20th Feb 2020 2:14am |
|
Blitz Member Since: 18 May 2019 Location: Billys Creek Posts: 33 |
Thanks David. I just managed to get the cover off. I can't see anything amiss. Wow, it's like looking at an alien compared to the old Series III! I have no idea with all the pipes going everywhere!
|
||
20th Feb 2020 3:17am |
|
bigbo Member Since: 07 Jul 2014 Location: Derbyshire Posts: 575 |
He He, now you know why they put a cover on! lol
|
||
20th Feb 2020 3:47am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis