FFRR 4.4 TdV8, 2011 MY. One of the previous owners has fitted an aftermarket towbar to the car I just bought. Nothing wrong with that except the car doesn't recognise when a trailer is connected and I like things to work the way they should. Is it likely that the wrong wiring harness has been fitted (in which case presumable I can simply replace it with the correct one) or is there some form of electrickery in LR's electronics that aftermarket suppliers are unable to access? Drives:
2010 FFRR TdV8 Vogue - Stornoway Grey
2010 FFRR TdV8 Vogue SE - Zermatt Silver
1998 BMW E36 M3 GTII

Could you take some photos of the 'bar, sockets and the interior socket/plug in the spare wheel well for us?
It may help with identifying the corret/incorrect fittings.

Oh and the aftermarket bar make. Cheers
Richard

(there are no such things as an ordinary FullFat, an ordinary cat or too many tools)
2011 TDV8 Vogue Santorini Black
Gap IIDBT

Gap report that when fitting to your car you don't need to tell the car you've done anything as it should recognise you've plugged into the socket provided -- as stated a photograph of the socket in the wheel well should help a diagnosis. Current: 2011 FFRR Vogue SE 4.4 TDV8
Previous: -
2004 FFRR Vogue 4.4 V8 with LPG
1997 P38 4.0 SE with LPG
1997 P38 4.6 Vogue with LPG

I'll try and get some photo's up shortly. The towbar is made by AI Towbars of Sheffield if that's any help. Thanks. Drives:
2010 FFRR TdV8 Vogue - Stornoway Grey
2010 FFRR TdV8 Vogue SE - Zermatt Silver
1998 BMW E36 M3 GTII

The bar itself isn't really relevant  Current: 2011 FFRR Vogue SE 4.4 TDV8
Previous: -
2004 FFRR Vogue 4.4 V8 with LPG
1997 P38 4.0 SE with LPG
1997 P38 4.6 Vogue with LPG

Well, I finally had a root around in the spare wheel well today and found the grey multi-pin socket for the towing electrics. Lord knows why someone has gone to all of the trouble splicing in the wiring, I can only assume they had no idea they are plug and play.

Having just bought myself another 4.4 TdV8 without a tow bar, I'll be checking the electrics on the existing car using the new loom that I'll be getting for the tow bar on the 'new' car and if it works ok, I'll simply replace what's there with a new loom and blank off all of the 'old' wiring. Drives:
2010 FFRR TdV8 Vogue - Stornoway Grey
2010 FFRR TdV8 Vogue SE - Zermatt Silver
1998 BMW E36 M3 GTII

I fitted a genuine LR 13 pin to my 2011 4.4 tdv8. Plug and play. Only tricky bit is getting the rubber grommet to sit properly in the bodywork hole. Used some silicone spray as lube
I don’t tow but use it to charge battery now and again with an adaptor for my ctek Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------

I know this has been asked before but I can't find the information now.

I've got a 2nd hand towbar to fit and need the electrics for my 2010. There seem to be numerous options available.

Is there a single kit that will do the job? I just want to be able to run a light board for a bike carrier initially but don't want to limit myself. Should I get 1 7 pin or a 13 pin or a twin?

The PF Jones kits seem much cheaper than genuine LR. Are they any good? 2010 4.4 TDV8 Vogue SE

In answer to the OP & kooky the PF Jones Kit is "plug & play" - fitted one to my 03 plate L322.

They do single x 7-pin, double x 7-pin & 13-pin variants. 2003 Range Rover Vogue TD6

kooky_guy wrote:

I've got a 2nd hand towbar to fit and need the electrics for my 2010. There seem to be numerous options available.

Is there a single kit that will do the job? I just want to be able to run a light board for a bike carrier initially but don't want to limit myself. Should I get 1 7 pin or a 13 pin or a twin?

The PF Jones kits seem much cheaper than genuine LR. Are they any good?

Personally I thing any RR (except for the Sprout) looks undressed without a towbar. 2003 Range Rover Vogue TD6

Brian Considine wrote:

In answer to the OP & kooky the PF Jones Kit is "plug & play" - fitted one to my 03 plate L322.

They do single x 7-pin, double x 7-pin & 13-pin variants.

The LR Genuine 13PIN kit is worth the extra £ IMHO. And it's plu and play for a 2011  Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------

kooky_guy wrote:

The genuine LR ones are MUCH more expensive. Do they do anything the PF Jones ones don't?

Yes. They charge a lot more for something that does exactly the same!  John
2008 Stornoway Grey 3.6 Tdv8 Vogue
2005 TD6 Java Black Vogue - Written off!!
GAP iiD BT
2003 Discovery TD5 Auto, Nanocom Evolution - gone to a new home!
MasseyFerguson 152 - No electronics!! - Sold

DrRob wrote:

The LR Genuine 13PIN kit is worth the extra £ IMHO. And it's plu and play for a 2011