Morning, I too have the black screen fault and would like to renew my camera. The link for the camera doesn’t seem to work anymore, was wondering if anyone could recommend a good replacement or if this one I have found will work suitably;

https://rover.ebay.com/rover/0/0/0?mpre=ht...3192402306

Thanks

Hi Mark,

https://www.ebay.co.uk/usr/parkingsensoron...7675.l2559

I purchased from these guys - they had a phone number on the listing I bought from and it was useful to phone them up and express the need for NTSC only and not NTSC/PAL - it gave me confidence after buying two from other sellers that were advertised as NTSC but turned out to be NTSC/PAL.

From what Miggit says, it seems like there are some different requirements based on the year. I think TDV8s are NTSC, but worth making sure you know what you need.

Cheers Mark

All the L322 Range Rovers use NTSC cameras.

But on the 2002-2005 BMW non touch screen system you can change the NTSC to PAL with NavCoder, of if your nearish I'll do it for you... as it's not VIN code locked, unlike other diagnostic tools that I could mention  Yesterday I couldn't spell Engineer... Today I are one!
Inventor of the 'Guide-o-Matic automatic wheel alignment tool'
Former long term L322 owner, Up/Down graded to a Classic Tractor!

Thanks for the reply’s. Ordered the same camera as you have. Looking forward to being able to see something different to the black screen

Thanks

SausageCreature wrote:

Hi Mark,

https://www.ebay.co.uk/usr/parkingsensoron...7675.l2559

I purchased from these guys - they had a phone number on the listing I bought from and it was useful to phone them up and express the need for NTSC only and not NTSC/PAL - it gave me confidence after buying two from other sellers that were advertised as NTSC but turned out to be NTSC/PAL.

From what Miggit says, it seems like there are some different requirements based on the year. I think TDV8s are NTSC, but worth making sure you know what you need.

Cheers Mark

Hi Glen, sorry it took so long to reply, I didnt realise there was a question and I also thought I had put the details of the ebay seller on here. Anyhoo. As I say, sorry and here is the ebay seller.
https://www.ebay.co.uk/usr/parkingsensoronline

One of his items has this in the text:

Any enquiries please contact:
Tel: 08456431688
E-mail: parkingsensoronlineshop@gmail.com

here you go GDM,
https://www.ebay.co.uk/itm/18-5mm-Rear-Vie...SwW5laorVG

.

Hi guys
I have just received my new camera, looking through the posts on here, I understand that you remove all the original bits from the housing, cut the wires, and solder the new connection.
How do you actually fix the camera into the housing, making sure everything is true?
Would appreciate some advice before I start this.

Make sure you don't cut the new cables before the power converter - the little black junction box where the cables are merged, otherwise you wont get the right signal to the screen.

I glued my replacement camera into the old housing, but you could just wrap it with foam or tape so that it fits nice and snug. In the housing on mine there was round recess that the new unit slotted nicely into. Mark the top of the new unit before fixing into place, so that you can tweak the angle and your view is not lopsided.

Good luck.

Update/Warning

The camera I bought from parkingcamerasonline ebay account has let water into the unit and needs to be replaced.

They are sending me a replacement today, it's not convenient, but we live and learn. I will seal this one before fitting it.

Hi my friends I’m new with this forum. I remplace my rear camera with a Chinese brand that camera come with led. I installed it but always the led are on. I want to know about the cable positive is on always or it is active only when I move in reverse.
Greetings from Panama

Hi my friends I’m new with this forum. I remplace my rear camera with a Chinese brand that camera come with led. I installed it but always the led are on. I want to know about the cable positive is on always or it is active only when I move in reverse.
Greetings from Panama

Hi my friends I’m new with this forum. I remplace my rear camera with a Chinese brand that camera come with led. I installed it but always the led are on. I want to know about the cable positive is on always or it is active only when I move in reverse.
Greetings from Panama

Hi my friends I’m new with this forum. I remplace my rear camera with a Chinese brand that camera come with led. I installed it but always the led are on. I want to know about the cable positive is on always or it is active only when I move in reverse.
Greetings from Panama

Hi Thomas,

i have the same problem as you have.
Seems like the LED have the same common ground as camera and react to the Video-Signal of the Navigation-System.

Unfortunately i haven't found a solution yet but will keep you updated...

BR from Germany Current:
- 2006 RR L322 - 3.6 TDV8
- 2022 MB AMG GT BS
- 2020 Audi Q2

Past:
- Ferrari California 30
- 2018 Abarth 595 Competizione
- 2009 Porsche Cayenne Diesel
- 2010 MB E500 Coupé
- 2005 Porsche 996 Turbo
- 2002 Porsche Boxster 986 S
- 2001 Audi S8