Can anyone confirm if this is the correct kit for the above car.

https://www.lrparts.net/seal-kit-for-bremb...sport.html

Thanks

That's the kit I used for mine which is a 2008 with 4 pot Brembos. One of my pistons had some corrosion on it so I also bought a piston kit and had those replaced. Don't have the details to hand but if you need them let me know and I'll look them up.

You should probably replace the pistons while replacing the seals. The piston coating let's go and allows the aluminium to corrode. Ruins the seals and seizes the pistons. The ones from Zeckhousen Racing are not coated and should last longer. Stoptech 46mm pistons. 2007 L322 3.6 TDV8 Stornoway

Cheers. Just found them there, link for anyone searching for this in future

https://www.zeckhausen.com/catalog/product...s_id=12656

https://www.rangerovers.net/forum/6-range-...ics/232090 2007 L322 3.6 TDV8 Stornoway

I’ve also found a company called Frentech in Burnley who offer a full rebuild kit for £89. 8 pistons and all boots and seals. Anyone used them?

There’s a separate company called SSL in Wakefield who will carry out the rebuild and paint the caliper for £245

These are the pistons I used - Budweg pistons which I was advised are very high quality.

I had already bought the Brembo seal kit before buying this but the kit came with another set of seals.

https://www.ebay.co.uk/itm/RANGE-ROVER-inc...Swr5dbs2a8