There was a time when I would undertake such a simple job myself but off to the Indie it must go. They only use genuine parts but want £650 all in for the fronts - seems fair, but is it? Geoff

Seems a little high for a simple job. How much of that is for the parts though? 2017 4.4 SDV8 Autobiography
2012 4.4 TDV8 Westminster - Gone, but not forgotten

Discs & pads RRP £493.00 You can paypal direct using - www.paypal.me/duckworthparts
Please supply your full name address when sending a paypal payment.
https://www.facebook.com/duckworthparts
www.duckworthparts.co.uk
My Direct Line: 01673 849873
Email: robin.hall@duckworth.co.uk
Supplier of Genuine Land Rover & Jaguar Parts For All Models

Maybe not so bad then  2017 4.4 SDV8 Autobiography
2012 4.4 TDV8 Westminster - Gone, but not forgotten

Eurocarparts using Brembo and the current 50% discount runs out at approx £350 for fronts and rears -- discs and pads -- though that price is for the 4.4 TDV8 Current: 2011 FFRR Vogue SE 4.4 TDV8
Previous: -
2004 FFRR Vogue 4.4 V8 with LPG
1997 P38 4.0 SE with LPG
1997 P38 4.6 Vogue with LPG

I'll be going with it, parts are expensive but I've read that it's best to use genuine bits and bobs, includes new sensors and fitting kits. Discs were about £75 each and the pads about the same. I am currently unable, due to having a gimpy leg, to do the work myself. Geoff

??
https://www.advancedfactors.co.uk/brake-parts-51-c.asp Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------

I think my labour cost for the fronts back in Jan at a very well respected LR Indie in London were ~£150, but the parts cost was definitely greater than that!

Bushy30 wrote:

Eurocarparts using Brembo and the current 50% discount runs out at approx £350 for fronts and rears -- discs and pads -- though that price is for the 4.4 TDV8

So I'll be using a reputable indie who only fit genuine parts, as I said I can't do the work but as Craig has indicated "buy cheap - buy twice" Geoff

Have you thought about these EBC Yellowstuff pads. Now I haven’t got them but it has been mentioned on here before with favourable feedback and a lot less dust.

Steve.

Cam-Tech-Craig wrote:

Buy that JUNK and you'll be paying for genuine brakes within weeks! BREMBO do NOT make brake pads! ECP's are selling cheap second rate pads in BREMBO branded boxes as there is a loophole in the branding law that allows any manufacturer to use the BREMBO logo when selling brake pads for vehicles fitted with BREMBO callipers...

Been there, tried that! Absolute junk!!!

Craig -- that is very interesting information -- thank you!

Do you have any clear recommendation of what to fit please ? Current: 2011 FFRR Vogue SE 4.4 TDV8
Previous: -
2004 FFRR Vogue 4.4 V8 with LPG
1997 P38 4.0 SE with LPG
1997 P38 4.6 Vogue with LPG

i've been down that road and fitted so called 'brembo' made pads and suffered for it..

craig also advised me of the branding loophole and i now all ways get OE pads....


apparently 'jurid' are suppliers of OE for the FF..

Stan,

Jurid, may be the supplier of the OE front pads - but it may vary according to caliper type / manufacturer.
If I remember correctly, there are TRW (what was Girling originally) + 2 types of Brembo caliper.
As stated previously, Brembo do not make pads, they only make calipers.

At the rear, I know the TRW single piston calipers used Ferodo pads, supplied by TRW as OE (Ferodo 4212 material)
I recently bought some genuine LR boxed rear pads which have Ferodo& TRW marking.
However, people beware pads with only TRW branding were NOT supplied as OE. TRW only manufacture their own unique TRWAftermarket pads. Paul,
2001 Discovery 2 TD5, 211,000 miles & climbing
2006 FFRR TDV8 Vogue 145,000 miles & climbing
Member of Midland (Land) Rover Owners Club, www.mroc.co.uk