Just fitted a new compressor and the back looks lower than the front, its had a lot of work done so id liek to check the suspension measurements.

I saw a photo/chart showing what all the settings should be for different wheel sizes (I have 22" on at present)

Does anyone have a copy of it they could post please?

This might help

http://www.fullfatrr.com/forum/topic44640....hth+height Current: 2011 FFRR Vogue SE 4.4 TDV8
Previous: -
2004 FFRR Vogue 4.4 V8 with LPG
1997 P38 4.0 SE with LPG
1997 P38 4.6 Vogue with LPG

Thats the one Bushy30, many thanks

Wheel sizes were important in the early days when we were measuring from the bottom of the wheel rim to the wing. now we measure from the hub centre, all standard fit wheels and tyres should have the same circumference, thus radius/diameter. However you may need to do some calculations for 22" wheels .
Experience is the only genuine knowledge, but as time passes, I have forgotten more than I can remember
Volvo V70 P2 2006 2.4 Petrol 170bhp Estate SE
MG Midget Mk1 1962

Previous: L322 Range Rover TDV8 3.6 2008; L322 Range Rover TD6 3.0 2002; P38A Range Rover V8 1999

Cheers Joe

Pretty sure the diagnostic tool my mate had showed 760mm (or thereabouts) as one setting, so guessing it measures the earlier way, from bottom of the rim to wheel arch