Did anybody get a definitive answer on this?

I've a MY2012 Westminster and there is no switch or rotate at all on the electric wheel adjuster stalk. The adjuster works perfectly when used manually.

I've checked the vehicle settings and it's enabled, and I have the current position stored in M1.

But the seat doesn't move or the wheel move on entry or exit any clues?

Old thread resurrected
How the f**k do I stop the seat and wheel moving on exit and entry?
Just want it to not move at all once set...
Is it only possible using a diagnostic tool like a Lynx or IID?
Cheers
Rob Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------

the iidtool can switch those off Rob..

Anyone in Hants got a pro IID?  Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------

craig [cam tec] has but he's near dursley...

Rob

Mine (MY11 4.4TDV8) has this option on the instrument panel menu. Not sure if it is set up on delivery or needs to be set up with an IID but I have just had a go. This has been the same since I purchased the car last October.

Right hand OK button on the wheel, brings up menu, scroll down to easy entry , enter OK and a tick should appear in the box and that should set up the seat and wheel to move to the lowest and highest position respectively for getting out. On re-entry, press engine start for the "ignition" and the wheel and seat move to your set memory positions.

Untick the easy entry box to stop the car doing this.

Trust this helps, but let us all know. I may be barking like a cat!! Cheers
Richard

(there are no such things as an ordinary FullFat, an ordinary cat or too many tools)
2011 TDV8 Vogue Santorini Black
Gap IIDBT

yes, mine is a 2012 Westminster and works exactly how Richard says.... I need more help than most...sorry !!

it is in the dash menu as well....

At first I thought that was a cool feature but the novelty didn't last long!
Turned it off the next day.
. Cheers, Greg
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2011 Vogue SE 4.4 with lots of toys in Stornaway

Me too! 2010 4.4 TDV8 Vogue SE

Thanks folks! Will check it out at weekend. Muchos gracias  Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------

Just to close this. It’s as described in replies above = uncheck the easy entry box on vehicle settings menu
PS I did RTFM but could not find it  Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------