https://bellautoservices.co.uk/store/range...ack-5-ply/

Found these online. They seem like what I am after.... 2009 Land Rover Rang Rover Vogue TDV8 - Buckingham Blue with Ivory Leather - 20” Alloys with Pirelli’s

As a job it’s a one spanner difficulty👍🏻

Can be done with a screwdriver in about 10 mins. Doing the top ones is all that needed, even with no mechanical know how it’s a simple and easy job to do. Doesn’t need a mechanic.

Have a look at this how to for the repair to one.

http://www.fullfatrr.com/forum/topic26843.html There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
KIA E-Niro 4+
2010 LR D4 Commercial 2.7 TDV6

I got the 6 hoses set , didn't fit the two turbo ones until i had replaced but the other 4 weren't too bad to do. 2015 4.4 AB
GSXR 1000 K5
R1 1998

Try these for your Mainbeams. They need a bit of fettling to fit but worth the effort.

https://www.ebay.ie/itm/H7-110W-20000LM-LE...1438.l2649

You may want these too if you don't want to alter the original bulb holders.

https://www.ebay.ie/itm/For-VW-Passat-B5-5...1438.l2649

You have to pull off the metal H7 collar from the bulb and fit the adaptor on, then re-fit the collar.
Its obvious how to do it when the parts are in front of you. The fiddly bit is turning the assembled bulb into the housing. I loosened off the torx bolts, turned it home then re-tightened the torx bolts.
The light output is brilliant

Any chance you fancy a run up north soon and do mine lol ahaha looks an unreal job! 2009 Land Rover Rang Rover Vogue TDV8 - Buckingham Blue with Ivory Leather - 20” Alloys with Pirelli’s