![]() | Home > General > Just typical.......!!!!! |
![]() ![]() |
|
|
northernmonkeyjones Member Since: 24 Mar 2012 Location: derby Posts: 8750 ![]() ![]() ![]() |
Worth shopping around, don't go with the cheapest, go with the one with the nicest cars on the lot! There are a few I have used round here and the guys I used for the bumper weren't the cheapest but they were the only ones who said that they would take the bumper off! There is nothing that can't be fixed with a hammer😜😜
|
||
![]() |
|
Rob99 Member Since: 03 May 2016 Location: Gatwick Posts: 1463 ![]() ![]() |
Bit of an update on my rear parking sensors.
|
||
![]() |
|
StewD Member Since: 22 Apr 2016 Location: Glasgow Posts: 129 ![]() ![]() ![]() |
F**k that.....
|
||
![]() |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35649 ![]() ![]() |
strange...parking senders are painted to match the colour of the bumper/car... ... - .- -.
|
||
![]() |
|
StewD Member Since: 22 Apr 2016 Location: Glasgow Posts: 129 ![]() ![]() ![]() |
Stan... my point exactly... they don't get the full thickness a body panel would get...
|
||
![]() |
|
Rob99 Member Since: 03 May 2016 Location: Gatwick Posts: 1463 ![]() ![]() |
Mine do look like they have been painted in with the bumper re-spray so.......
|
||
![]() |
|
rodp Member Since: 09 Apr 2017 Location: The Black Country Posts: 318 ![]() ![]() ![]() |
Whatever means you use, I would only do one to start with. How about something as simple as fine wet and dry or 1000 wire wool, at least that won't damage the plastic. |
||
![]() |
|
Baltic Blue Member Since: 13 Aug 2015 Location: North Wales Posts: 3823 ![]() ![]() ![]() |
Try dipping the end of a cotton wool bud in cellulose thinners then rubbing one before going to the trouble of removing them. G reg 2.5VM Vogue Portofino red 1991- 1999
|
||
![]() |
|
Spelunker Member Since: 02 May 2016 Location: Nottinghamshire Posts: 248 ![]() ![]() ![]() |
I found that corrosion was causing the paint to 'bubble' on a couple of mine causing the sensors to activate when there wasn't anything near them. A good clean up and repaint cured the problem... QUID FACIUM TIBI
|
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
