fullfatrr.com - View topic - GAP Diagnostic Announcement-2016-07-25-Apple App & More

Advertise on fullfatrr.com »

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Other Site Sponsors > GAP Diagnostic Announcement-2016-07-25-Apple App & More

Page 1 of 2

Print this entire topic ·

PatGAPInnov
Site Sponsor

Member Since: 01 Dec 2011
Location: Montreal
Posts: 153

2010 Range Rover Autobiography 5.0 SC V8 Causeway Grey

GAP Diagnostic Announcement-2016-07-25-Apple App & More

Hello Everyone

First, we would like to thank all our customers, beta testers and the community for your continuous support. Many new additions were the results of your feedback and suggestions. We could not be where we are without you!

As many of you already know by now, a new App, version 2.9, for Apple devices was released over the week end. We’ve also released a new special firmware available for beta testers only at the current time. I will do a second post shortly showing each point in detail but here’s a resume of the new additions when using both the new App and firmware or using the new App only with an older firmware.

Top Bar (new and old firmwares): A new bar was added which shows the current connection and ignition status as well as battery voltage.

Faults function (new and old firmwares): Advanced Read Advanced Read
-Status bit flags default selection can be saved for future use
-Status bit flags are visible as icons on top of fault descriptors
-Status bits can be included in the exported emails

Height Adjust (new firmware only): A new and more intuitive screen to adjust your suspension height with default and saved settings. Contrary to our previous method, height changes are relative to the default height and not the current standard height.

0 -> 25: current height, 0 mm, or default in this example is shown on the left while the selected height setting (My offroad height in this example) is shown right, + 25 mm

Click image to enlarge

20 -> -10: current height, +20 mm relative to the normal height (0 mm), shown on the left while the selected height setting (Motorway in this example) is shown right, -10 mm relative to the normal height (0 mm).

Click image to enlarge

Height Control (new firmware only): This function allows you to remotely control your current height (Access, Normal, Offroad) and lower both axles to the bumpstops.

Suspension Calibration (new firmware only):
-New manual calibration layout
-New guided calibration function. This unique method eliminates the need for calculations, even ground and requires only one iteration. The whole process takes 5 minutes.

Click image to enlarge

Guided calibration instructions:
• The first corner to be calibrated is the front left corner (1).
• Place your measuring tape as instructed and use the up and down arrows (2) to reach the required height (3).
• Once completed, click on Send (4). The next corner to be calibrated will now be high-lighted.
• Repeat the previous steps for all corners.

New Suspension Test Valve function layout (new firmware only)

Click image to enlarge

Live values:
-All live values (PIDs) are now available for all supported vehicles (L322: except for older BMW type ECUs, new firmware only)
-Trigger function which allows custom audible or vibration alarm and automatic start/stop logging of live values. (new and old firmwares)

Click image to enlarge

Trigger example:
• The live value increases and passes the Start target of 20 % (first red dotted line)
• Recording begins and the previous data is kept (2 seconds, as set)
• The Stop condition is met at around 6.5 seconds, hence the trigger indicator (red dotted lines)
• Recording continues for 4 seconds as set
• Enabling the Buzzer will generate a sound when the condition is met. Perfect when moni-toring live data. Can be used without using the automatic recordings feature.

-Favourite Fast Add feature which allows adding live values to favorite list quicker. (new and old
firmwares)

Click image to enlarge

• Click on the star when viewing an ECU live values

Click image to enlarge

1- Click here to create a new list
2- Current favourite lists are shown here
3- Click on the star to add the live value to this favourite list

-Layout improvements (new and old firmwares)
-Selection of which live values to be exported and viewed (logs). (new and old firmwares)

Click image to enlarge

Car Configuration File (new and old firmwares):

-Complete CCF list can be edited upon request.
-Favourite Fast Add feature which allows adding configurations to favorite lists quicker.

ECU Info (new firmware only): This new layout is the basis for what will be the next step reflashing wise. It now shows which ECUs are up to date and those for which a newer version is available. If you are testing this function, please send us the results using the send e-mail button for our records. This will help us validate the automatic file selection algorithm.

[img]https://www.gap-diagnostic.com/docs/2016-07-28%20App%20Release/ECU Info.png[/img]

An historic of each ECU Info scan is saved and can be recalled.

Tool Activation (new and old firmwares): Initial activation of the IIDTool can all be done within the App when the mobile device is connected to the internet. Additional licences can also be entered in the App.

New French version (except for live values and car config, new firmware only)

Documentation: The user manual was completely overhauled and will be released in the comming days in French and English.

Jaguar support: It is now possible, upon request, to use the IIDTool BT or Pro on 2008 and up Jaguars.

Work on the Android App is still under way. If you are using Android devices only, please do not update to the special firmware 2434 (English), 2435 (French) or 3630 (Pro English), 3631 (Pro French) and up since the firmware is not backward compatible with earlier App versions. You can, however, revert back to the latest beta if Android usage is required after using it on an Apple device.

Our current beta testers using Apple devices can benefit from these new additions by updating the App to V2.9 and IIDTool firmware to:

BT:
-Special Build 2439 (English, French upon request)

Pro:
-Special Build 3643 (English, French upon request)

We strongly recommend updating your mobile device operating system (iOS) to the latest version prior to using the new App and firmware.

As usual, feedback is more than welcome! For those who are not currently beta testers and want to test the new App and firmware simply send us an e-mail or a PM.

Cheers

Edit: Added pictures and additional comments.[/img] http://www.gap-diagnostic.com/

Last edited by PatGAPInnov on 3rd Aug 2016 1:32pm. Edited 7 times in total

25th Jul 2016 5:37pm

stan
Site Moderator

Member Since: 13 Jul 2010
Location: a moderate moderated moderator moderating moderately in moderation
Posts: 35292

brilliant

link to itunes app,

https://itunes.apple.com/gb/app/iidcontrol/id634092136?mt=8 ... - .- -.

Y. O. L. O.
.

25th Jul 2016 6:13pm

verydisco

Member Since: 10 Dec 2009
Location: UK/US
Posts: 2952

2002 Range Rover Vogue 4.4 V8 Tangiers Orange

These are a massive improvement guys! Congratulations!

I really like the new Suspension Calibration and am sure the French version will be a great asset for the froggies.

l=Oo\________/oO=l l:OolÎžÎžÎžÎžÎžÎžÎžloO:l

Current
RANGE ROVER Vogue 4.4L SDV8 - 2013 - Indus Silver, on Almond.
RANGE ROVER Vogue 4.4L V8 - 2002 - ex-2003 G4 Challenge Event Vehicle, Stage 3: Australia
RANGE ROVER HSE 4.4L V8 - 2004 - one-of-one Overfinch
RANGE ROVER P38a 4.0L V8 - 1999 - ex-2000 TReK Event Vehicle: South Africa

Previous:
RANGE ROVER Vogue 4.4L TDV8 - 2012 - RANGE ROVER 3.6L TDV8 x3 - RANGE ROVER Td6 x1 - RANGE ROVER Classic 3.5L V8 x1

27th Jul 2016 6:48am

axle

Member Since: 28 Oct 2007
Location: Perth Perth the end of the Earth
Posts: 2964

2008 Range Rover Supercharged 4.2 SC V8 Rimini Red

Just update but those are not the firmware build numbers I am getting . 2008 MY Supercharged
Rimini Red / Jet
four zone climate
remote park heater
and no ugly kid windows.
magnus satis quod turpis satis

28th Jul 2016 4:14am

Billydun34

Member Since: 04 Sep 2014
Location: Aberdeenshire
Posts: 45

2010 Range Rover Vogue SE TDV8 Zermatt Silver

-Special Build 2419 (English) ????? i don't see this option in the list when i try to update firmware via the uploader program.i only see build 2184(special) and build 2309 (special)

28th Jul 2016 9:46am

Realist

Member Since: 13 Feb 2016
Location: Wales
Posts: 436

Fantastic effort, thanks. Range Rover quotes.....

The Luxury Thatï¿½s More Than a Luxury.
Conquer the world, and look good doing it.
Built for the unexpected.
Over prepared, but never underdressed.

2007 Vogue SE TDV8 Epsom Green (old car).
2010 Discovery 3.0L GS Mk4 Black.

28th Jul 2016 10:08am

Realist

Member Since: 13 Feb 2016
Location: Wales
Posts: 436

Umm I only see the following:

3.00.00 B2134 (Release)
3.01.00 B2184 (Special) Range Rover quotes.....

The Luxury Thatï¿½s More Than a Luxury.
Conquer the world, and look good doing it.
Built for the unexpected.
Over prepared, but never underdressed.

2007 Vogue SE TDV8 Epsom Green (old car).
2010 Discovery 3.0L GS Mk4 Black.

28th Jul 2016 10:12am

PatGAPInnov
Site Sponsor

Member Since: 01 Dec 2011
Location: Montreal
Posts: 153

Are you part of the Beta program? If not, you will not see them. Send me a PM or mail if you want to join in http://www.gap-diagnostic.com/

28th Jul 2016 1:29pm

Realist

Member Since: 13 Feb 2016
Location: Wales
Posts: 436

PM sent. Range Rover quotes.....

The Luxury Thatï¿½s More Than a Luxury.
Conquer the world, and look good doing it.
Built for the unexpected.
Over prepared, but never underdressed.

2007 Vogue SE TDV8 Epsom Green (old car).
2010 Discovery 3.0L GS Mk4 Black.

28th Jul 2016 1:50pm

PatGAPInnov
Site Sponsor

Member Since: 01 Dec 2011
Location: Montreal
Posts: 153

And replied... http://www.gap-diagnostic.com/

28th Jul 2016 1:53pm

Realist

Member Since: 13 Feb 2016
Location: Wales
Posts: 436

I take my hat off to you guys for producing a simple but needed bit of kit to keep us FFRR nerds happy.

Updated and I'll test tomorrow and report back. Range Rover quotes.....

The Luxury Thatï¿½s More Than a Luxury.
Conquer the world, and look good doing it.
Built for the unexpected.
Over prepared, but never underdressed.

2007 Vogue SE TDV8 Epsom Green (old car).
2010 Discovery 3.0L GS Mk4 Black.

28th Jul 2016 6:25pm

Weegie

Member Since: 09 Jun 2014
Location: East Sussex
Posts: 3233

2008 Range Rover Vogue TDV8 Stornoway Grey

Having a little problem sending the information for ECUs?

May have resolved it. John
2008 Stornoway Grey 3.6 Tdv8 Vogue
2005 TD6 Java Black Vogue - Written off!!
GAP iiD BT
2003 Discovery TD5 Auto, Nanocom Evolution - gone to a new home!
MasseyFerguson 152 - No electronics!! - Sold

3rd Aug 2016 11:46am

uthiele

Member Since: 18 Mar 2015
Location: Berlin
Posts: 1

PatGAPInnov wrote:
Are you part of the Beta program? If not, you will not see them. Send me a PM or mail if you want to join in

Unfortunately, I am not able to send a PM, as I am a happy consumer of this forum.

Would you please also include me in the beta program?

Many thanks

Ulf

5th Aug 2016 6:52pm

PatGAPInnov
Site Sponsor

Member Since: 01 Dec 2011
Location: Montreal
Posts: 153

PM sent http://www.gap-diagnostic.com/

5th Aug 2016 7:00pm

Dr. Gonzo

Member Since: 29 Jul 2016
Location: Silverthorne, CO
Posts: 3

2011 Range Rover Supercharged 5.0 SC V8 Zermatt Silver

If its still available, i'd like to be included in the beta. Thanks.

23rd Mar 2017 6:08pm

Page 1 of 2

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum