![]() | Home > Wheels & Tyres > Slack nuts ! |
![]() ![]() |
|
|
northernmonkeyjones Member Since: 24 Mar 2012 Location: derby Posts: 8680 ![]() ![]() ![]() |
Which Nut? Caliber or wheel? There is nothing that can't be fixed with a hammer😜😜
|
||
![]() |
|
J evro Member Since: 31 Aug 2014 Location: Kent Posts: 541 ![]() ![]() ![]() |
Wheel nuts |
||
![]() |
|
Weejock Member Since: 30 Dec 2011 Location: UK Posts: 418 ![]() ![]() |
It's either:
|
||
![]() |
|
northernmonkeyjones Member Since: 24 Mar 2012 Location: derby Posts: 8680 ![]() ![]() ![]() |
What sized socket are you using?
|
||
![]() |
|
Haylands Member Since: 04 Mar 2014 Location: East Yorkshire Posts: 8372 ![]() ![]() ![]() |
The nuts have a stainless cover that fits over the actual nut, you put the socket over these covers, they will have play in them and move a bit, as long as the nuts are done up tight you will be OK.... |
||
![]() |
|
pld118 Member Since: 25 Mar 2013 Location: Bairns Posts: 4218 ![]() ![]() ![]() |
Was going to say what Haylands said also |
||
![]() |
|
axle Member Since: 28 Oct 2007 Location: Perth Perth the end of the Earth Posts: 2964 ![]() ![]() ![]() |
Haylands is your man , sloppy stainless steel caps . think nothing of it |
||
![]() |
|
tb10 Member Since: 17 Feb 2015 Location: Bromsgrove Posts: 339 ![]() ![]() ![]() |
I agree! |
||
![]() |
|
J evro Member Since: 31 Aug 2014 Location: Kent Posts: 541 ![]() ![]() ![]() |
Well done those that said.......Loose SS Caps you were all quite correct |
||
![]() |
|
Haylands Member Since: 04 Mar 2014 Location: East Yorkshire Posts: 8372 ![]() ![]() ![]() |
Hope you put some grease on those mating surfaces otherwise you will have corroded on wheels the next time you try to take them off.... |
||
![]() |
|
J evro Member Since: 31 Aug 2014 Location: Kent Posts: 541 ![]() ![]() ![]() |
All greased up matey |
||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
![](../images/layout/footer/disclaimer.gif)