fullfatrr.com - View topic - Removing the tow bar

Advertise on fullfatrr.com »

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical (L322) > Removing the tow bar

Page 1 of 1

Print this entire topic ·

SCPB

Member Since: 16 Jun 2015
Location: Surrey
Posts: 72

2010 Range Rover Autobiography 5.0 SC V8 Zermatt Silver

Removing the tow bar

My apologies for all the questions, I am still trying to get to grips with my first Range Rover.

I currently have this Westfalia tow bar (see image below) which was fitted from new, including the removable section in the cubby hole to the right of the spare wheel. I don't have any of the parts that were removed during fitting.

I don't need the tow bar, so thought that I would just remove it. It must weigh 30 kgs all in. In the searches I have found a link to the instruction manual, but it looks as if I remove it, I will need to buy some of the original parts that were removed during fitting. I think I need, the original plastic cubby hole liner and the two large end fittings, one of which has the original towing eye. The wiring loom seems to disconnect from just inside the spare wheel well.

Do I need any bolts or other fittings? Does anyone have the parts that they removed, that are in good condition, which I can buy?

Thanks in advance. 2010 5.0 SC Autobiography

9th Aug 2015 9:57am

Cam-Tech-Craig

Member Since: 03 Aug 2011
Location: Gloucestershire
Posts: 16284

2015 Range Rover SVAutobiography SDV8 Loire Blue

You have a PM sir

9th Aug 2015 10:05am

stan
Site Moderator

Member Since: 13 Jul 2010
Location: a moderate moderated moderator moderating moderately in moderation
Posts: 35272

i'd leave it in place ...its not doing any harm and it will be an asset when you decide to sell yours. ... - .- -.

Y. O. L. O.
.

9th Aug 2015 12:45pm

PaulB

Member Since: 17 Jul 2011
Location: Hampton
Posts: 877

2017 Range Rover Autobiography SDV8 Loire Blue

As Stan says, leave it there.

The bracket you need to put back in its place weighs nearly as much as the tow armature.

9th Aug 2015 12:49pm

SCPB

Member Since: 16 Jun 2015
Location: Surrey
Posts: 72

Thanks guys, I can see you're absolutely right. I initially thought that carrying around 40kgs of towbar armature and kit for the next 5 years was a bit of a waste, if I wasn't going to use it and I could just keep it anyway to help sell the car when the time came. I have now removed the two parts that I can unbolt which actually weigh around 10kgs on their own.

So Paul as you say, the difference in weight is relatively small as the weight saving is only the additional weight of the cross member part of the armature.

I just need the plastic bowl to fit in the space I now have in the right hand cubby hole and I will have somewhere to put my tools instead of squashing them down the side of the spare wheel. It can't be too expensive so I have asked Dan to add one to my current order of parts.

Thanks again for the advice and Craig, thanks for the offer. 2010 5.0 SC Autobiography

9th Aug 2015 1:51pm

stan
Site Moderator

Member Since: 13 Jul 2010
Location: a moderate moderated moderator moderating moderately in moderation
Posts: 35272

the right hand side cubby hole is an ideal place to store a hydrolic jack.. ... - .- -.

Y. O. L. O.
.

9th Aug 2015 1:59pm

SCPB

Member Since: 16 Jun 2015
Location: Surrey
Posts: 72

Thanks Stan, I will do just that, I was looking at the threads on the bottle jack last week. 2010 5.0 SC Autobiography

9th Aug 2015 2:06pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum