Home > General > What Did You Do In Your Full Fat Today |
|
|
Chillb Member Since: 25 Jul 2012 Location: Portsmouth Posts: 142 |
Down the Witterings
|
||||
8th May 2015 8:48pm |
|
iKushtyy Member Since: 19 Apr 2015 Location: London Posts: 94 |
Got the gearbox flushed. feels amazing!! No more hesitant changes, no more slight vibration at 2000rpm, thoroughly recommended. Very happy |
||
9th May 2015 11:49am |
|
markcaughey Member Since: 03 Nov 2014 Location: Glasgow Posts: 316 |
fixed my door handles
|
||||||||||
9th May 2015 8:52pm |
|
DannyH Member Since: 30 Apr 2015 Location: Hull Posts: 221 |
nice job mark, looks good pal.
|
||
10th May 2015 10:10pm |
|
markyp Member Since: 04 Feb 2013 Location: essex Posts: 234 |
Flew back from 10 days in Egypt and the fatty burst into life no problem 2004 vogue
|
||
11th May 2015 7:38pm |
|
Scottyav Member Since: 11 Feb 2013 Location: Cannock Staffordshire Posts: 1204 |
Went to Jeffrey West shoe HQ in Northampton to get a few pairs of shoes ended up with five pairs and the Rangey was an absolute dream smooth/quiet/impressive beautiful thanks mate _____________________________________________________
|
||
11th May 2015 7:51pm |
|
mat777 Member Since: 06 Apr 2015 Location: Nantwich/Liverpool Posts: 139 |
Looks fantastic! What did you do? mine are the same so I am looking for solutions NW060 "Red Shed" - 1982 Series 3 88" County Station Wagon "Spirit of Great Britain" - Rolls Royce Meteor V12 engine ZG875 - Westland Sea King (cockpit section) "Carly Rae Jeepsen" - 2006 Jeep Commander 5.7 Hemi "Pride Of The Road" - 1/4-scale Marshall traction engine - sold "Georgina" - 2000 Discovery 2 TD5 ES - sold "Windsor" - 2005 Range Rover Vogue 4.4 - dead |
||
12th May 2015 9:55pm |
|
markcaughey Member Since: 03 Nov 2014 Location: Glasgow Posts: 316 |
tape up around the handle to make sure you don't mark the door when sanding i also used a business card as i went to protect the door, then sand down effected areas to the bare plastic ( p400 grit sand paper ), mask up, plastic prime, base coat ( Halfords Rover grey ), laquer ( Halfords satin or matt lacquer. i got the satin lacquer as they had no matt left but as you can see they came out great.
|
||
12th May 2015 10:38pm |
|
DannyH Member Since: 30 Apr 2015 Location: Hull Posts: 221 |
Already after only 5 days of ownership I'm already annoyed with the seatbelt dropping to the floor so last night I put a new clip through the seatbelt to stop it half way down the seat. Brilliant! Dan
|
||
13th May 2015 6:42am |
|
ajac8 Member Since: 04 Oct 2011 Location: Shakespeares County Posts: 1656 |
Busy day. Sons 18th so out for lunch to the Robin Hood in Doitwich (nice place).
|
||||||
15th May 2015 6:36pm |
|
gregdav Member Since: 26 May 2014 Location: just north of stafford Posts: 1077 |
Two pirelli scorpion zeros fitted today £235.20 all in well chuffed and wow what a difference. |
||
15th May 2015 7:24pm |
|
Madyaker Member Since: 13 Apr 2015 Location: Wigan Posts: 39 |
Took the tin tent to N.Wales for first time with my "new" L322 vogue. She behaved well but on 2 occasions I noticed that after pulling off to refuel, when rejoining traffic and accelerating to speed the revs stayed high(3500) for a minute or so before dropping to the 2000 or so I was getting for the same speed before I stopped. Is this normal or a sign of a fault coming on ? I would be grateful for any insights/info http://www.fullfatrr.com/forum/images/smiles/icon_confused.gif |
||
17th May 2015 4:47pm |
|
viper Member Since: 11 Apr 2015 Location: manchester Posts: 271 |
pumped 3 litres of nice fresh brake fluid through the system . All nipples opened ok apart form one that was a rusty mess and couldn't be bled , ive replaced it . It was the only nipple without a rubber cap so they do work! |
||
17th May 2015 5:28pm |
|
jakebullet64 Member Since: 28 May 2014 Location: Wolverhampton Posts: 259 |
yep, can't beat a bit of rubber to keep those nipples nice 2003 Range Rover Vogue 4.4 on Gas 1961 88" 2.25 diesel - George Gone - 1997 3.9 V8i Discovery - Burt |
||
17th May 2015 7:49pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis