Advertise on fullfatrr.com »

Home > Technical (L322) > What size hub nut
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Welshdragon



Member Since: 20 Jan 2012
Location: here and there...but not where I should be
Posts: 1899
Wales 2003 Range Rover Vogue 4.4 V8 Monte Carlo Blue
What size hub nut

After some help please fella's,

I have a broken spring on the hand brake (off side) so need to get the hub off, what size is the nut and torque setting.
rear disc/drum was squealing, I have backed the shoes off and got the retain spring out.

I did read on another thread somewhere it was 38 mm? And set at 420lbs, that's flippin tight Big Cry is this correct? If it dont work.......burn it!

If the IId tool cant fix it.......burn the FF.

If the FF cant be fixed......buy a Land Cruiser!

If the LC cant be fixed..............................................BUY a horse !!
Post #327010 10th May 2015 10:46am
View user's profile Send private message View poster's gallery Reply with quote
Joe90



Member Since: 29 Apr 2010
Location: Hampshire
Posts: 6408
England 

Why do you need to remove the hub nut? rear disc is held in place by an allen screw in the disc face. This will release the disc/drum and give access to the springs and handbrake cable assembly at the top of the hub. .
Experience is the only genuine knowledge, but as time passes, I have forgotten more than I can remember Wink
Volvo V70 P2 2006 2.4 Petrol 170bhp Estate SE
MG Midget Mk1 1962

Previous: L322 Range Rover TDV8 3.6 2008; L322 Range Rover TD6 3.0 2002; P38A Range Rover V8 1999
Post #327026 10th May 2015 2:01pm
View user's profile Send private message View poster's gallery Reply with quote
Welshdragon



Member Since: 20 Jan 2012
Location: here and there...but not where I should be
Posts: 1899
Wales 2003 Range Rover Vogue 4.4 V8 Monte Carlo Blue

Confused

Ok going to have a look now again!

Thanks Tim Thumbs Up If it dont work.......burn it!

If the IId tool cant fix it.......burn the FF.

If the FF cant be fixed......buy a Land Cruiser!

If the LC cant be fixed..............................................BUY a horse !!
Post #327032 10th May 2015 2:21pm
View user's profile Send private message View poster's gallery Reply with quote
Welshdragon



Member Since: 20 Jan 2012
Location: here and there...but not where I should be
Posts: 1899
Wales 2003 Range Rover Vogue 4.4 V8 Monte Carlo Blue

Must of had a brain fart Laughing . ... I blame me been on nightshift last night !

Disc off and temporary repair done till new shields bought as they are pretty rusty Big Cry


Click image to enlarge





Thanks Tim for the info, oue you a beer for that....was looking at getting some tools Laughing Embarassed If it dont work.......burn it!

If the IId tool cant fix it.......burn the FF.

If the FF cant be fixed......buy a Land Cruiser!

If the LC cant be fixed..............................................BUY a horse !!
Post #327042 10th May 2015 3:48pm
View user's profile Send private message View poster's gallery Reply with quote
Cam-Tech-Craig



Member Since: 03 Aug 2011
Location: Gloucestershire
Posts: 16284
England 2015 Range Rover SVAutobiography SDV8 Loire Blue

Joe90 wrote:
Why do you need to remove the hub nut? rear disc is held in place by an allen screw in the disc face. This will release the disc/drum and give access to the springs and handbrake cable assembly at the top of the hub.


Need to release the hub nut, remove hub to renew brake backplate believe it or not!!! Shocked Shocked Shocked

Lot of work for a posy bit of tin!!! Rolling Eyes
Post #327044 10th May 2015 4:06pm
View user's profile Send private message View poster's gallery Reply with quote
Welshdragon



Member Since: 20 Jan 2012
Location: here and there...but not where I should be
Posts: 1899
Wales 2003 Range Rover Vogue 4.4 V8 Monte Carlo Blue

Do you Craig, didn't look like it from what I was look at it earlier Big Cry

If that's the case it looks like the temporary repair may be long term fix Laughing If it dont work.......burn it!

If the IId tool cant fix it.......burn the FF.

If the FF cant be fixed......buy a Land Cruiser!

If the LC cant be fixed..............................................BUY a horse !!
Post #327047 10th May 2015 4:31pm
View user's profile Send private message View poster's gallery Reply with quote
Cam-Tech-Craig



Member Since: 03 Aug 2011
Location: Gloucestershire
Posts: 16284
England 2015 Range Rover SVAutobiography SDV8 Loire Blue

The backplate is a solid round unit that bolts/fixes in such a way you need to remove lots to fit WD!
Post #327049 10th May 2015 4:40pm
View user's profile Send private message View poster's gallery Reply with quote
Welshdragon



Member Since: 20 Jan 2012
Location: here and there...but not where I should be
Posts: 1899
Wales 2003 Range Rover Vogue 4.4 V8 Monte Carlo Blue

Big Cry Big Cry Big Cry Big Cry Big Cry Big Cry Big Cry Big Cry Big Cry Big Cry

Good old LR ....they have never learnt to do simple jobs easy have they.


Still need an new socket then to do the job. Crying or Very sad

Thanks Craig Thumbs Up If it dont work.......burn it!

If the IId tool cant fix it.......burn the FF.

If the FF cant be fixed......buy a Land Cruiser!

If the LC cant be fixed..............................................BUY a horse !!
Post #327055 10th May 2015 4:57pm
View user's profile Send private message View poster's gallery Reply with quote
47p2



Member Since: 05 Oct 2010
Location: Gone Beyond, Subaru
Posts: 8048
Scotland 

Too much work involved in changing the backplate, have a read here
Post #327058 10th May 2015 5:25pm
View user's profile Send private message View poster's gallery Reply with quote
Joe90



Member Since: 29 Apr 2010
Location: Hampshire
Posts: 6408
England 

^^^ for fixing/sorting the holes ( I just used some washers)

This for removing/refitting backplates/splashguards without removing hub

http://www.fullfatrr.com/forum/topic18371.html?highlight=splash

http://www.fullfatrr.com/gallery/thumbnails.php?album=714

A lot of peoples do this with the new ones, due to the hassle Whistle .
Experience is the only genuine knowledge, but as time passes, I have forgotten more than I can remember Wink
Volvo V70 P2 2006 2.4 Petrol 170bhp Estate SE
MG Midget Mk1 1962

Previous: L322 Range Rover TDV8 3.6 2008; L322 Range Rover TD6 3.0 2002; P38A Range Rover V8 1999
Post #327070 10th May 2015 6:44pm
View user's profile Send private message View poster's gallery Reply with quote
Welshdragon



Member Since: 20 Jan 2012
Location: here and there...but not where I should be
Posts: 1899
Wales 2003 Range Rover Vogue 4.4 V8 Monte Carlo Blue

Mrs WD is bring some of them springs home from work later that are used on there cars to see if they do the job.

My washer temp repair is good enough but the other spring on same side is well and truly foobared.

New disc shields are now 50 quid .....Each! Shocked
(Thanks sir Dan for the quick reply this morning but going to ...err leave them on the shelf ) If it dont work.......burn it!

If the IId tool cant fix it.......burn the FF.

If the FF cant be fixed......buy a Land Cruiser!

If the LC cant be fixed..............................................BUY a horse !!
Post #327199 11th May 2015 4:15pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
fullfatrr.com RSS Feed - All Forums


Switch to Mobile site