Gents I need your help please

I want to permantly expose my front towing eye on the FF,on my previous D3 & D4 I've removed the plastic cover and fitted a Mantec Sumpguard like the one below...

Click image to enlarge

Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated

Yes & no

G4 (mantec) under body protection was made for the 02-06 & for the 06-09 but to my knowledge never made for the 09> cars as the G4 challenge was discontinued

I have both here if your passing and want to look? I would think the 02-06 would maybe fit the later cars???

What is it with me always wanting the not so readily available ...

Not sure when I will be passing Craig ...but I need to ..thanks

If you're interested I'm currently chatting with a local (to my parents in West Wales) fabricator to build up some underbody protection for my 2007 TDV8. He's currently having a look at pricing up different kinds of alloys vs. galvanised steel etc.

Someone on this forum did manage to persuade Mantec to do a limited run of their G4 stuff but we weren't sure whether it would fit a TDV8. It was also a pretty penny and probably overkill for what I wanted - just a little extra protection.

[edit]Benefit of going this route is that it'll be completely bespoke so can be customised to what you want.[/edit] Ed

Yes please sako243

Mine is a 2011

Well I'm hoping to at some point today go under mine in the barn pit to get some dimensions for him. Although I have to take the pack (four labs) out for a walk / shoot first and then replace a fence.

What kind of stuff are you after? The Mantec ones are 8mm and overkill for what I wanted - given most of the time the vehicle's on the road I was looking along the lines of 3mm ish to cut down on weight but still offer protection against the more "violent" gentle knocks. Ed

Ed...

I'm not going to be seriously off roading,but I do a lot of work on farms and occasionally I need to be recovered by a tractor ,there's nothing worse than getting stuck and then having to lay down in the mud to remove the stupid plastic cover,but with this removed the front end looks awful,so it's primarily to make the front more acceptable

Similar usage to me then - except I'm aiming to take mine to Morocco at the end of the year. Although I was primarily focused on the underbody protection rather than front-end but I'm sure Chris can work around it. Ed

can you not fettle away a bit of the plastic to make the 'ring' more accessible.. ... - .- -.




Y. O. L. O.
.

Morocco ...wow !

I've contacted Ray(RLD) on the D4 forum as his work is legendary,but unfortunately he can't help

stan wrote:

can you not fettle away a bit of the plastic to make the 'ring' more accessible..

Stan that's plan B

could you maybe fettle it enough to be able to clip one of these on the tow eye,



http://www.ebay.co.uk/itm/RED-Winch-Brothe...3a92b20da2 ... - .- -.




Y. O. L. O.
.

Thanks ,I was going to say is that man enough then noticed 4000kg

This is the Mantec one,



It is very substantial and well over the top for normal laning and off roading, it's only touched a few times, I would have thought 4mm would be strong enough for most...

The fuel tank is actually the lowest thing under there, I'd be tempted to get that sorted as well, mines got the Mantec guard on there and it's hit more, also the transfer box cage will get caught, I used the rear exhaust guard (modified) to fit that and it's had some use!! Never hit the exhaust though!!

Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated  Pete
__________________________________________________
2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior
2012 L322 Autobiography 5.0 Supercharged Ipanema Sand Sold
2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Sold
2002 L322 Vogue 4.4 V8 Epson Green (Fatty Offroader) Sold
-Click for Project Fatty off roader-