Hello All
I bought from powerful uk the piano black inserts now struggling to get top dash off to fit the two side inserts at the side of radio/infotainment system . In a recent post in car electronics it was mentioned about two hex screws under top vents I have found them and removed but can't figure out how to remove air bag housing behind / over CD player . There are also three hex screws behind the range rover badge which I have also removed there seems enough clearance to remove radio with out removing air bag housing but can't find all removel screws . any ideas ?
Kind Regards
Paul

Two 10mm headed bolts hold the airbag to the frame sir

Thanks for your reply , I see the bolts but not sure how to get to them

Don't overky understand your dilema! If you can see them... Do you not have suitable tools?

Yes I do have tools ,and can see them when looking through side panel but they behind CD player , and seem hard to get tools on , It got dark last night so will take some pics tomorrow thanks
Paul

Both gloveboxes need to come out (top one includes CD player) then you have access to the two bolts...

Thank you for that is there wiki or posts on the removal of gloveboxs ?
Paul

3 million torx screws... That's all...

thanks for your help ,best get screwing then
Kind Regards
Paul