And this is it next to the one I've just taken out that's holding only 8v at the minute without any load on it and then drops when there is a load on it

It's about an inch longer so will be fun fitting it!

Thanks Kingpleb!

Good luck! I already read the wiki replacement procedure... and is enthusiastic!!!!

I don't see the time to replace mine!  Ex-FULLFATTY now downgraded

L494 RRS P400e Dynamic Narvy Black

-------------------------------------- gone
6 | FF-RR 2007 TDV8 Vogue JAVA BLACK
5 | FF-RR 2003 TD6 Vogue Bonatti grey
4 | Ex-RR 2000 P38 automatic
3 | Ex-RR 1994 300tdi classic
2 | Ex-RR 1993 200tdi
1 | Ex-RR 1991 turboD VM engine

Well it's installed, didn't take more than 30mins if that to do including cleaning the tray and taking the cables all out and putting them back in and the drain tube as well

Mine still won't turn over but at least it's getting me on my way to getting it back on the road sometime this decade lol FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

Good luck with it Will, hope you get it sorted soon.

Cheers David

Off out with a fully charged laptop and a faultmate to plug in and see what's what  FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.