Hi all,

I've searched forum but couldn't find anything on this. When switching on the windscreen heater (if frost on the screen), do people find that a small vertical section right in the middle of the windscreen stays misted/frosted for a bit longer than the rest and then eventually clears up?

Could this be due to the heating elements working from outside in or have I got a faulty element in the middle?

forgot to mention that this is the second windscreen on the car, the first being replaced due to stone chips so if this is not normal, could be that the heating elements not connected properly MY11 Vogue 4.4 TDV8 - "African Queen"

Last edited by shalz on 22nd Nov 2013 2:23pm. Edited 1 time in total

My new windscreen does this too.

Mine only clears on the passenger side. I'm told there are two fuses- one for each side. Anyone confirm this?

Not had to use the FFRR one yet but my 110DC defender has the middle line

The heating element is in two parts and they dont quite meet in the middle. Perfectly normal.  There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
Fiat 500x 1.4 multiair Lounge 2015
2010 LR D4 Commercial 2.7 TDV6

^

Yep

That's correct!

Thanks all, huge sigh of relief for a change. This forum is tops! MY11 Vogue 4.4 TDV8 - "African Queen"

If you look very closely from the inside you can see the element nes in the screen... You will also see there is one or two missing in the middle hence your question...

Thanks Craig. Took a look this morning and see what you mean. Should have looked more closely.

On a separate note I know I'm due to call you and will do so soon once I've got my timings sorted. MY11 Vogue 4.4 TDV8 - "African Queen"

my screen dont work at all and cant seam to find out why unless the screen is damaged its the same one that came out for the factory in 2003...... Life to short for all the b### ###t
current drive
1 FFRR L322
5 Discovery 4
4 Range Rover L494
3 Range Rover L405
3 Range Rover Evoque
3 Freelander
6 Defender 110