Hi Dan

Whilst trying to remove the glove box to get at the CD changer I, like many others (!), have managed to strip the thread on one of the two screws that holds the latch mechanism in place. I'm going to try and remove the damaged one tomorrow, but I'm expecting to have to replace the whole latch. Could you get me a price on a replacement please?

Also, I am told that there should be a small spring, about the size of a biro spring, that fits back into the latch mechanism? Mine seems to have "pinged" off somewhere during the glove box removal process, so could you confirm if there should be one and if so, can you get hold of a replacement of one those too?

My VIN = Mod edit- vin removed for security

Thanks Mod for that I'll pm my VIN to Dan  Cheers

Greg

Go ahead punk, make my day........

Previous vehicles:-
Far too many to list (in excess of 45!)

Last edited by dirtyharry on 21st Mar 2013 8:41pm. Edited 1 time in total

If you have stripped the thread I think there is enough room to put a half nut on a longer screw

Thanks for the tip. I'll try that tomorrow.

I'm still not sure about the spring. Don't suppose you know if there should be one located in the latch? Cheers

Greg

Go ahead punk, make my day........

Previous vehicles:-
Far too many to list (in excess of 45!)

Had a quote the other day from the good man himself about this one yesterday £49 plus the vat I think there is a spring somewhere so I'll sell you my old spring for £11.49 plus vat hehe. I'm going to see if mine is broken beyond repair before coughing up.

Can't recommend Dan's services highly enough though, I recently bought some bits for my brakes and everything went perfectly at a great price.

there is a spring it sits in the latch behind the angled plunger if you look at the latch underneath is a slot the sprung shoots out from there and thats where you put it back in its fiddley I think mine got lost and I replaced with a biro spring from memory the type I used was the stronger type tighter wound at each end if any one knows what im on about

Nice one spanner! That's exactly the answer I was after. Now where did I leave all those biros....


SteveyD - Cheers for the info on the price. If you do decide to "break" your latch for spares, I might be interested in the spring (if I can't find a suitable biro), but there could be a bidding war on the asking price of £11.49 +VAT asking price


Dan - SteveyD has answered my original question, so thanks anyway.

Thanks guys - ever helpful, as always  Cheers

Greg

Go ahead punk, make my day........

Previous vehicles:-
Far too many to list (in excess of 45!)

 You can paypal direct using - www.paypal.me/duckworthparts
Please supply your full name address when sending a paypal payment.
https://www.facebook.com/duckworthparts
www.duckworthparts.co.uk
My Direct Line: 01673 849873
Email: robin.hall@duckworth.co.uk
Supplier of Genuine Land Rover & Jaguar Parts For All Models