hi guys, my drivers side washer has stopped working, i have cleaned the jets with a pin several times, and pulled the supply tube off which has plenty of water and pressure but still nothing comes our

any idea's as to what could be the problem as im a bit confused. all i can think of is that the jet/s must still be blocked,

also what are the electrical connections for to each jet , as i thought the only power would be going to the pump . or are they for something else

bob

Dont know for sure, but think that the washer jets are actually a valve, yhat might be what the wires are for. The pump pressurises the system and the valves then open and let out the water. Sounds like the valve is bust. Try swapping them round. There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
KIA E-Niro 4+
2021 Discovery 5 D300 MHEV commercial

thanks for that, i will swap them over and see what happens looks like another order from dan but i doubt they are not expensive

bob

Happened to me a few weeks back done the pin thing and pulled the hose off water getting through okay , time to get a new washer jet from Dan at Duckworth's , 5 min job to change . ====================================

"Open Mike Night " sounded like a lot of fun until i found out i was going to an Autopsy

£8 inc Vat from Dan  ====================================

"Open Mike Night " sounded like a lot of fun until i found out i was going to an Autopsy

thanks joker, will place an order for both of em.

kind regards

bob