Have you just welded around the area where it joins together? Is this enough to stop it coming apart?

Have you just welded around the area where it joins together? Is this enough to stop it coming apart?

Its just welded each side where the triangle bits are and a bit on the front and back so not completely welded. just make sure its a good weld and it will be fine. mine has towed some heavy trailers and not a problem. you should try and make sure the two parts are properly connected first though if possible then the weld is only an extra precaution. '04 td6 se
'63 land rover s2 200tdi
'04 mk indy kitcar bike engine

You could also contact westfalia to see if there is a service kit to replace the lock and mechanism? I should imagine that they will provide something like this.

to separate you need to pull out the wheel before turning....... looks bust, but if you can get it out then there are a few necks on their own for sale for about £100.

or for occasional use you could go for http://www.ebay.co.uk/itm/Westfalia-Towbar...3b51d4eec/

they are removable and normally come with a bag to keep it in.

£205 notes for a new neck and reciever from PF jones via ebay... There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
KIA E-Niro 4+
2021 Discovery 5 D300 MHEV commercial