I have a MY12 HSE and have watched the videos on the Land Rover site and noticed the following image on the instrument panel. I first thought it was the front PDC but I think it may be related to the adaptive cruise control? Any ideas?

Click image to enlarge

What does the manual say???? Does it come on when you are about to hit a wall or hit a car at speed?  Previously..
Vogue SE TD6
Defender 90 2.4
Defender 110 TD5
Vogue 3.5 EFI

That's the issue -- I can't get it to show up. It's not the front PDC because that I need to press the PDC button for the front to engage (or be in reverse). It's no where in the manual either.

Could it be a feature that never made it -- but is on their website in a video?

So if you have cruise on, and you come up behind a car, does it indicate in some way that it is adapting the cruise control? I would have thought there would be a warning of sorts? Previously..
Vogue SE TD6
Defender 90 2.4
Defender 110 TD5
Vogue 3.5 EFI

Oh, and welcome to the forum  Previously..
Vogue SE TD6
Defender 90 2.4
Defender 110 TD5
Vogue 3.5 EFI

I believe it's for setting the gap on the adaptive cruise control

Interesting -- will try that out.

As Simon1233 says it is the gap chosen for the adaptive cruise control, it goes up to 4 chevrons selected by the 2 buttons behind the cruise control buttons. It is a time gap not a distance gap so the actual gap shortens at slower speeds within the low speed range of the ACC.

As above its the ACC gap. I think it goes to 4/5 Arrows but can go down to 1  FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

In the words of Jeremy Clarkson: "You can go from polite to full on Audi with the Jaguar ACC" 
07 Supercharged - Still breaking her in!

Boot soundproofing part 1 - http://www.fullfatrr.com/forum/topic15612.html
Custom exhaust - http://www.fullfatrr.com/forum/topic15296.html
18" wheels for Brembo equipped cars - http://www.fullfatrr.com/forum/topic15052.html

Comes up on the display when you select 'set' and displays 3 chevrons. Also comes up if you use the buttons under the wheel as they allow you to decrease to 1 or increase to 4.

It would be useful if the default could be set to 1 as that is what I tend to use.

Ian

Testbook or maybe Faultmate could do this as im guessing it would be in the CCF file somewhere  FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.