Home > Maintenance & Mods (L322) > [SOLVED] - Rear washer problem? |
|
|
Joe90 Member Since: 29 Apr 2010 Location: Hampshire Posts: 6408 |
I very rarely use it, but tried it a couple of days ago, got a dribble (from the washer!) then that was it.
|
||
20th Oct 2012 2:08pm |
|
47p2 Member Since: 05 Oct 2010 Location: Gone Beyond, Subaru Posts: 8048 |
The jet on the wiper arm will be blocked up with crud, a poor design |
||
20th Oct 2012 2:23pm |
|
Jonno Member Since: 08 Jun 2011 Location: Eastnor HR8 Posts: 191 |
I doubt if it's the jet but more as like the non return valve on the pipe just before the water goes into the wiper.
|
||
20th Oct 2012 2:32pm |
|
Joe90 Member Since: 29 Apr 2010 Location: Hampshire Posts: 6408 |
Thanks John and Jonno.
|
||
20th Oct 2012 2:54pm |
|
Joe90 Member Since: 29 Apr 2010 Location: Hampshire Posts: 6408 |
Could be different firmware given 4 years difference between cars. My handbook doesn't say how many squirts, but does say it will give 3 more wipes once the "washing" has finished. Maybe it depends on how long you hold the stalk against the spring for? .
|
||
20th Oct 2012 4:48pm |
|
northernmonkeyjones Member Since: 24 Mar 2012 Location: derby Posts: 8513 |
Just replaced my rear washer arm as the joint had corroded preventing the spring from pressing the arm against the screen and the washer jets werent working properly, I thought it may have been the non return valve as to why i had no squirting however a new arm in position its working fine.
|
||
20th Oct 2012 5:48pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis