fullfatrr.com - View topic - Blackvue Installation

Advertise on fullfatrr.com »

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

You are currently viewing fullfatrr.com as a guest - Register to take part or Log In

Home > In Car Electronics (L322) > Blackvue Installation

Page 1 of 1

Print this entire topic ·

Alistair

Member Since: 11 Feb 2011
Location: Peterborough / Bordeaux / Andorra
Posts: 8001

2013 Range Rover Vogue SE SDV8 Santorini Black

Blackvue Installation

I finally got round to ordering a Blackvue camera at the weekend - it arrived today.

It looks very neat - I havent done much with it yet, but did start my install

I wanted it as neat as possible, but didn't want to take the car to pieces, so I think I managed a pretty good compromise that took about half an hour so far.

I decided to put it as tight in as possible on the passenger side - the down side of it being this tight is that it needs to be removed from the holder to get the SD card out - but mounting on the drivers side would leave more cable exposed.....

I fed the cable up from the glove box - I pilled out the bit of trim by the passengers feet and took out the vent, then fed a fibreglass rod through

The rod was too firm for the next bit, so I used a net curtain cord (that would pobably have been better for the last part too

I then taped the power lead to the rod then cord and pulled it through.

Finally I just tucked it into the headlining & ran it down next to the windscreen, pulled the spare cable through & then popped the vent back in.

I've not wired it in yet - the cable just goes straight through the glove box and into the cig lighter, but the next job is to get a Piggyback fuse and wire it into the fuse box in the glovebox

10th Jul 2012 7:27pm

Alistair

Member Since: 11 Feb 2011
Location: Peterborough / Bordeaux / Andorra
Posts: 8001

Removing the vent is 1:15 into this Powerful video

10th Jul 2012 7:31pm

Budgie

Member Since: 09 Jul 2012
Location: Stornoway
Posts: 267

Thanks for the link to those piggyback fuse holders, that'll come in handy for a few things.

10th Jul 2012 9:30pm

47p2

Member Since: 05 Oct 2010
Location: Gone Beyond, Subaru
Posts: 8048

I fancy something like this, but it would need to be installed into 4 different vehicles

10th Jul 2012 9:33pm

Budgie

Member Since: 09 Jul 2012
Location: Stornoway
Posts: 267

I've got a Suction Mount for a normal camcorder that I used on the Belgium National for a couple of years.
It's not the smallest thing to have stuck to the screen but it works and gives a nice stable image when off road. It also allows you to use it in different vehicles.

10th Jul 2012 10:03pm

Alistair

Member Since: 11 Feb 2011
Location: Peterborough / Bordeaux / Andorra
Posts: 8001

You can buy additional holders & leads.....

I've actually just ordered a second one off eBay - direct from Korea for about half what I paid on Amazon.

10th Jul 2012 10:06pm

Paulo

Member Since: 28 Sep 2010
Location: Glasgow
Posts: 199

Alistair, great work etc...

Keep us posted on how good or bad the Blackvue is as I want to purchase one or something similar for my car...

11th Jul 2012 10:58am

stan
Site Moderator

Member Since: 13 Jul 2010
Location: a moderate moderated moderator moderating moderately in moderation
Posts: 35633

this thread [with links] could be useful,

http://www.fullfatrr.com/forum/topic10013.html?highlight=blackvue ... - .- -.

Y. O. L. O.
.

11th Jul 2012 11:02am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum