found one on Pistonheads - guy's offering to fit it quoting 'upper tailgate comes off, 4 10mm bolts, remove exsiting brake lense, swop the brake light lead connector, fit spoiler onto upper tailgate whist its off the car, malke sure its nice and secure, re-fit, quite straight forward'.

is it this simple and what about the rear facing camera - does that get affected or does is attach to the spoiler?

thanks
Cuda 07 S/C in Java with Ebony

 Past (too many to list, but a few favs)...
2007 Porsche 997 C2S Coupe
2007 FFRR 4.2 S/C
2012 Jag XKR 5.0 S/C
2014 Merc SL500 AMG 4.7 V8 BiTurbo (remapped to 560BHP)
2011 FFRR 4.4 TDV8 Vogue SE - Overfinch Conversion
2012 Porsche Cayenne Turbo
2018 AMG C63S Estate
2015 Mercedes GLE63S
2017 Maserati Levante Diesel
2017 Audi A6 Avant 3.0 Black Edition

Last edited by jfb1977 on 30th May 2012 4:58pm. Edited 1 time in total

Should be a doddle.

The process is the same as when you need to get to the rear washer - undo 4 bolts, lift off brake light housing etc.

It's literally 4 bolts which are easy to get to with the boot open, then lift off the top section with the brake light in it, unplug and then the reverse the process to refit.

Do a search for how to repair the rear windscreen washer and you should find some pics I think...  Past (too many to list, but a few favs)...
2007 Porsche 997 C2S Coupe
2007 FFRR 4.2 S/C
2012 Jag XKR 5.0 S/C
2014 Merc SL500 AMG 4.7 V8 BiTurbo (remapped to 560BHP)
2011 FFRR 4.4 TDV8 Vogue SE - Overfinch Conversion
2012 Porsche Cayenne Turbo
2018 AMG C63S Estate
2015 Mercedes GLE63S
2017 Maserati Levante Diesel
2017 Audi A6 Avant 3.0 Black Edition

ok thanks so that doesn't interfere with the camera? 07 S/C in Java with Ebony

Ahhhh. You'll have to check with the seller about the camera - I would assume that if the spoiler has been designed properly, it will have a mounting bracket / holes for the camera and you'd just swap it over from your current spoiler to the new one.

If they haven't allowed for it then it's a big oversight as most L322s have a camera.

Can you get any pics of the new spoiler so you can check? Past (too many to list, but a few favs)...
2007 Porsche 997 C2S Coupe
2007 FFRR 4.2 S/C
2012 Jag XKR 5.0 S/C
2014 Merc SL500 AMG 4.7 V8 BiTurbo (remapped to 560BHP)
2011 FFRR 4.4 TDV8 Vogue SE - Overfinch Conversion
2012 Porsche Cayenne Turbo
2018 AMG C63S Estate
2015 Mercedes GLE63S
2017 Maserati Levante Diesel
2017 Audi A6 Avant 3.0 Black Edition

i asked the seller whether it interferes with the camera and he says:

quote

Good question, it doesn't as it sits above the camera without any modification or inconvenience. That is why Overfinch are the best Land Rover tuning company in the World. They are very clever and design these things with every item on Range Rovers in mind.

unquote

willl have a look this eve at where the camer is etc..

thanks so far 07 S/C in Java with Ebony

A quick search revealed some useful photographs of rear spoiler removal and camera changing http://www.fullfatrr.com/forum/topic4621.html (but I don't know where the plug to the camera wires is).

i have pics of the spoiler but no idea how to post on here as there's no browse button like on p'heads...!

[/img] 07 S/C in Java with Ebony

have a look in site announcements for picture posting how to.. ... - .- -.




Y. O. L. O.
.

jeez thats alot of admin just to post a pic... 07 S/C in Java with Ebony

Spend time doing admin, or spend money on a spoiler you can't use! Tough call!  Got - 2017 SDV8 Autobiography in Loire Blue
Had- 2008 TDV8 Vogue SE in Java black
Had - 2007 S/C in Stornoway Grey

cuda wrote:

i asked the seller whether it interferes with the camera and he says:

quote

Good question, it doesn't as it sits above the camera without any modification or inconvenience. That is why Overfinch are the best Land Rover tuning company in the World. They are very clever and design these things with every item on Range Rovers in mind.

unquote

willl have a look this eve at where the camer is etc..

thanks so far

If its a proper Overfinch spoiler then you have to remove your 3rd brake light and fit the spoiler in the same holes after fitting the brake light back into the same size and shape hole/recess in the spoiler... So a kind of piggy back affair if that makes sense... You'll need to remove the inner top trim panel that covers the wiper motor to unplug/replug all the wiring for the brake light and camera etc...


Craig

Hi I am new on here and noticed your post!!! I fitted one to my RR last week and it is straight forward if you need any info or pics pm me.....

alanm_3 wrote:

Spend time doing admin, or spend money on a spoiler you can't use! Tough call!

Tried again - lets hope this works...

Does this look like genuine Overfinch spoiler? Cant see where the camera woudl fit...

Click image to enlarge