The seller of the spoiler says:

'it sits above the camera without any modification or inconvenience.'

Does it really? 07 S/C in Java with Ebony

YES Thats what i said in my earlier post too!!!!!

Cam-Tech-Craig wrote:

YES Thats what i said in my earlier post too!!!!!

Fight, fight, fight...  Past (too many to list, but a few favs)...
2007 Porsche 997 C2S Coupe
2007 FFRR 4.2 S/C
2012 Jag XKR 5.0 S/C
2014 Merc SL500 AMG 4.7 V8 BiTurbo (remapped to 560BHP)
2011 FFRR 4.4 TDV8 Vogue SE - Overfinch Conversion
2012 Porsche Cayenne Turbo
2018 AMG C63S Estate
2015 Mercedes GLE63S
2017 Maserati Levante Diesel
2017 Audi A6 Avant 3.0 Black Edition

Gentlemen take your corners please

Cam-Tech-Craig wrote:

cuda wrote:

i asked the seller whether it interferes with the camera and he says:

quote

Good question, it doesn't as it sits above the camera without any modification or inconvenience. That is why Overfinch are the best Land Rover tuning company in the World. They are very clever and design these things with every item on Range Rovers in mind.

unquote

willl have a look this eve at where the camer is etc..

thanks so far

If its a proper Overfinch spoiler then you have to remove your 3rd brake light and fit the spoiler in the same holes after fitting the brake light back into the same size and shape hole/recess in the spoiler... So a kind of piggy back affair if that makes sense... You'll need to remove the inner top trim panel that covers the wiper motor to unplug/replug all the wiring for the brake light and camera etc...


Craig

Ok, please read the above again... Where is your 3rd brake light? Yes way above the camera... So if you remove said brake light and stuff the spoiler in that hole and refit, it's no ware near the camers and can in no way interfere with its function...


Craig

PM sent with pictures hope it clears the matter up regarding the camera.....