Anyone got any ideas on how best to tackle the swirls and scratches that are all over my metal kick plates (the ones that run along the sill as you open the doors) - mine have a very nice "Supercharged" motif on them.

I was thinking about some Autosol - but am worried that it might take out the etched logos.

Any ideas? Pics if you'd had success sorting these yourself would of course be awesome!  Past (too many to list, but a few favs)...
2007 Porsche 997 C2S Coupe
2007 FFRR 4.2 S/C
2012 Jag XKR 5.0 S/C
2014 Merc SL500 AMG 4.7 V8 BiTurbo (remapped to 560BHP)
2011 FFRR 4.4 TDV8 Vogue SE - Overfinch Conversion
2012 Porsche Cayenne Turbo
2018 AMG C63S Estate
2015 Mercedes GLE63S
2017 Maserati Levante Diesel
2017 Audi A6 Avant 3.0 Black Edition

autosole is abrasive so it will remove fine scratches, it will do the same on the logo, but i think you will find they have been polished and lacquered, check on a small corner and if the cloth starts to go black then its not lacquered but be careful around your logo V8 facelift Range Rover Autobiography 22" wheels.
1976 Harley Davidson Iron Head Sportster

Maybe you could get them refinished or anodised. You can get the supercharged bit off by gentle prying, its held on with doublesided tape. Or buy non Supercharged ones (Cheaper) and swap the logo. I did this and it worked fine.
Cheers
Andy