Home > General > 2003 to 2007 or 2009 Facelift Conversion? |
|
|
coko Member Since: 13 Sep 2009 Location: ... searching ... Posts: 107 |
welcome mate, it is not a difficult job to convert a pre MY06 model to a post MY06. however converting to a MY10 model there is a fair bit of wiring required.
|
||
18th Jan 2010 10:12am |
|
betty02 Member Since: 16 Dec 2009 Location: Blackpool - UK Posts: 16 |
Hey Coko, thanks for the reply. Looks like i will do the 06 conversion then if it can be done by myself? (thanks for the link though)
|
||
18th Jan 2010 10:19am |
|
Andy Member Since: 23 Feb 2009 Location: Shropshire Posts: 2938 |
Don't forget that the interior is different as well, so the facelift won't fool everyone! 2010 MY Vogue SE TDV8 3.6 Stornoway Grey- fully loaded |
||
18th Jan 2010 11:09am |
|
betty02 Member Since: 16 Dec 2009 Location: Blackpool - UK Posts: 16 |
Yeah i noticed the interior difference, not really doing it to make it something it isn't, just I prefer the look of the 06 facelift so if it's cheap enough with second hand parts and I can do it myself i will. if not then not going to spend £2000 on a conversion when I could of spent that bit extra to possibly get an 06 plate if that makes sense?
|
||
18th Jan 2010 11:55am |
|
coko Member Since: 13 Sep 2009 Location: ... searching ... Posts: 107 |
noddy we used to run a 55 plate SC (owned from new) that had the MY06 exterior but pre MY06 interior from factory. the only difference in the interior to our MY02 TD6 was the touch screen sat-nav |
||
18th Jan 2010 12:59pm |
|
mercuryf1 Member Since: 13 Jan 2009 Location: Penang Posts: 169 |
For the MY2010 conversion, check out: http://l322.com/. You will get a pretty good idea what is involved.
|
||
18th Jan 2010 2:30pm |
|
Vogue Member Since: 31 Jan 2008 Location: on the hill Posts: 3747 |
Yes, Coko is right, these were 06 MY vehicles and some are on 05 plate registrations - they also have the benefit of the lower tax rate of £215 instead of over £405 !!!!!!! |
||
18th Jan 2010 2:43pm |
|
JOKER Member Since: 11 Sep 2008 Location: Sconnie Botland Posts: 15876 |
|
||
18th Jan 2010 6:13pm |
|
betty02 Member Since: 16 Dec 2009 Location: Blackpool - UK Posts: 16 |
Thanks! That's a great link and i must say it looks amazing, don't suppose you have a full list of parts for both conversions? Looks like the trickiest bit is getting the front crash bar on? Does look amazing though top job!
Hmmm lower tax yes please l lol |
||
19th Jan 2010 8:43am |
|
dantheman Member Since: 02 Feb 2009 Location: North: Lancs Posts: 477 |
Yeah, asbolutely!
|
||
19th Jan 2010 6:57pm |
|
Sidney Member Since: 20 Jan 2010 Location: Herefordshire/Welsh border Posts: 47 |
Glad I just read this thread, have done a deal on a 55 plate facelift. Just trying to sort out having a hand control fitted (disabled driver) and the fitters were claiming there is no way its a facelifted model before an 06 plate. (hand control different on 06 because of interior). I was disagreeing with them... turns out we're both kinda wrong! That sorts that out then! |
||
20th Jan 2010 1:40pm |
|
delsilencio Member Since: 08 Apr 2009 Location: toulouse Posts: 116 |
http://l322.com/ XJC, RRV8, Series1 86 and 107% of real pleasure |
||
26th Jan 2010 2:07pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis