I got 4 255/50/20 Pirelli scorpions, I can't find the e mark and we fail the nct here In Ireland if they don't have it.I have my Sunday glad rags on, can anyone confirm where the e mark is on these tyres..? Also what's the best psi when inflating them, only got them on fri and they look a little soft already..

Do you often run with a load in the back or just yourself and 1-2 copilots??

For the latter
36psi
38psi

Front
Back

For the former
38
42

With the higher pressures drop em back down if your running light for any period of time otherwise the centre d the rear tires wears quickly...

Can't help with the e mark but maybe check the pirelli site or google?? FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

Thanks

Tbh I run mine just below the max most of the time as I carry speed into corners which keeps wear even enough  FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

Is this what you are meaning Lolo ….

Just bottom right of the Pirelli stamp marking ….

Click image to enlarge

not pirelli lolo, but general tyre info that might help..

 ... - .- -.




Y. O. L. O.
.

Thanks guys I'll have to get under car to have a look at the other side of the tyres so..the e is on one tyre on the outside so I am assuming the marks are on the inside of the other ones, please g0d..

No the e mark is on all the tyres on the outside , you don't need to get under the car ,

Well if that's the case I'm well p d off cause no e marks on my 3 pirellis, could that mean dodgy knock offs? Joker are u sure the e marks on ur scorps are on the other side also..?

Right you are starting to lose me , on all my four Pirelli's the "e" mark is on the four separate tyre walls of each tyre …. if it is marked on the inside i don't know but at a guess i am thinking it should be …..

Ur easily lost so.. well when u get a chance can u check the insides( as in the other side of ur tyre walls )to see if the e marks are on them. My tyres were part worn so I am assuming when the were fitted the guy put the worn/scuffed walls on the inside..

Yes Mick, get your ass under the FFRR and check your e-marks

Check the inside's , you having a Giraffe ,

Ah go on, are u not curious..?

No ….