TD6 '02 FFRR Fog Light Refurbishment |
 |
| TITLE |
+ |
- |
| FILE NAME |
+ |
- |
| DATE |
+ |
- |
|
|
01 - Foglights on – 41 viewsIn preparation for converting my fogs to drl's I decided to give the lamp housing an overhaul
|
|
17 - All back together and working – 48 views
|
|
02 - Foglight with OEM bulb – 40 viewsExisting lamps still working well, but "yellow"
|
|
03 - Gently lever the cover off using a flat bladed screwdriver – 48 viewsuse a cloth to cover the screwdriver blade for added paint protection
|
|
04 - Remove first screw – 47 views
|
|
05 - remove Second screw – 46 views
|
|
06 - Remove third screw – 44 viewsThis one is set further back so you might need a torch to see exactly where it is
|
|
07 - All screws removed and lamp housing withdrawn from bumper – 47 views
|
|
09 - Lamp Housing removed from car – 50 views
|
|
08 - Release lamp housing from connector – 46 viewsThis is quite stiff so use a flat bladed screwdriver to release the small clip
|
|
10 - Testing the intended DRL LED lamps – 64 viewsThese weren't a tight fit in the connector like the OEM bulb, so may need to "bend" the blades a bit
|
|
11 - Undo the retaining torx bolt to allow the two halves of the housing to come apart – 55 views
|
|
| 17 files on 2 page(s) |
|
1 | |
|
