To fit a new outside door handle end cap do I need to take the whole door panel off or is there an alternative way?

grateful for any advice

.

Yes! Better take a covers. Does the job very well Daniel

Past:FFRR 2004 Vogue 4.4l bonnatigrey/sand/ burr walnut
Modifications: SC grill (not fixed) SC MY10 sidevents (not fixed), MY10 Letters front and back, clear sidelights , MY10 rear lights (not fixed), MY09 steering wheel trims, new MY09 sterringwheel 19'' seven spoke wheel (not fixed) 19'' MTS (not fixed), 20 '' wheels, doorhandelcovers brunel (not fixed), complete doorhandels (not fixed) burr walnutdoorsouround (not fixed)

if its just the end cap then there is a screw in the door shut that holds it.. V8 facelift Range Rover Autobiography 22" wheels.
1976 Harley Davidson Iron Head Sportster

!

Daveo,

thanks for that

Yep looked at this but wasn't sure if this would release the end cap only (rave didn't really show anything),
I have tried to remove the door panels but no joy and am a little worried about breaking something if I force them to much. The screw / nut you refer to is also in a position which I'm concerned about as it looks like it could fall somewhere inside the door where I cant retrieve it.

Check out powerfuluk's video on how to remove a door card



Here's a link to all their videos:

http://www.powerfuluk.com/videofittingguides.html .
Experience is the only genuine knowledge, but as time passes, I have forgotten more than I can remember
Volvo V70 P2 2006 2.4 Petrol 170bhp Estate SE
MG Midget Mk1 1962

Previous: L322 Range Rover TDV8 3.6 2008; L322 Range Rover TD6 3.0 2002; P38A Range Rover V8 1999

Many thanks to all that responded // I have replaced all end caps of the door handles including the drivers door which was slightly different due to the key barrel. Only problem now is the end caps look a slightly different colour to the original handle looks like I shall have to swap these over in the new year. I'm now thinking I should have purchased myself the covers that Powerful UK sell

Still we live and learn .....