Home > Technical (L322) > Auto wipers not working after windscreen replacement |
|
|
madnessgonemad Member Since: 28 Aug 2020 Location: Kent Posts: 97 |
I had this. They either have not put the sensor on properly or the windscreen thickness is wrong. Check your headlight sensor is working as they are the same unit.
|
||
6th Jul 2024 10:11am |
|
AndyRoo Member Since: 06 Dec 2023 Location: Gloucester Posts: 564 |
Mine did the same but got progresively erratic to the point where they were next to useless.
|
||
6th Jul 2024 10:40am |
|
p38arover Member Since: 16 Dec 2015 Location: Western Sydney Posts: 1534 |
I had to do a sensor recalibrate when my screen was replaced. Mine's a 2003 model so may be different. I used Faultmate to do the recalibrate, Ron B. VK2OTC
|
||
7th Jul 2024 3:29am |
|
Andyyav Member Since: 13 Mar 2017 Location: Norfolk Posts: 138 |
Had a look with the GAP iid but couldnt see a recalibration for the sensor, also noticed the auto lights flicking on and off a few times, windscreen company coming back to have a look, gave the impression its not the first time theyve had the issue 1972 Series 3 full of character
|
||
8th Jul 2024 9:11pm |
|
Andyyav Member Since: 13 Mar 2017 Location: Norfolk Posts: 138 |
Now had the sensor replaced still not working, national windscreens are saying the sensor needs coding to the car? Anyone experienced this?
|
||
25th Nov 2024 11:01am |
|
madnessgonemad Member Since: 28 Aug 2020 Location: Kent Posts: 97 |
I had the same after National Windscreens. I was actually quite pleased because auto lights still work and I always found the rain sensor was all over the place.
|
||
26th Nov 2024 10:35am |
|
p38arover Member Since: 16 Dec 2015 Location: Western Sydney Posts: 1534 |
Not coding, recalibration. A few minutes work with Faultmate. I haven't tried Testbook/T4. If it wasn't so hot outside (39 deg C/102 deg F), I'd drag T4 out of the garage and run it. Ron B. VK2OTC 2003 L322 V8 Auto 2007 Yamaha XJR1300 Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA |
||
27th Nov 2024 4:35am |
|
Andyyav Member Since: 13 Mar 2017 Location: Norfolk Posts: 138 |
can it be done with the GAP tool? 1972 Series 3 full of character
|
||
27th Nov 2024 4:39am |
|
Full-fat-Lance Member Since: 06 Feb 2022 Location: Essex Posts: 121 |
I’ve been going through all of this recently with autoglass after they fitted a shatterpruffe (or whatever it is) screen at the end of September. As far as I’m aware you can’t recalibrate the sensor.
|
||
7th Dec 2024 6:04pm |
|
Andyyav Member Since: 13 Mar 2017 Location: Norfolk Posts: 138 |
I think I’ll end up with the same result, one technician proved the sensor worked as you describe above, another then came and said 100% the sensor is knackered 🤦🏻♂️ fitted a new sensor and swears it needs recalibration, booked into the local Indy on Wednesday with a caveat that a pilkington screen will be fitted if it doesn’t fix it
|
||
7th Dec 2024 8:22pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis