Hi all and hope you are well........

Garage door being fitted soon to make it wider overall.

The full dimensions of the garage are:

Access width 90" (2300mm)
Width inside 125" (3175mm)
length 198.5" (5040mm)

Interested to know your single garage dimensions, how does it compare, and will a L322 fit in my garage?

Steve

this is from the owners manual [download link in the wiki]


 ... - .- -.




Y. O. L. O.
.

Yes your L322 will fit in (assuming you have sufficient height clearance ) and don’t forget that up and over garage doors reduce the clearance.

I recently moved into a new built house and was lucky enough to get the builder to add a couple of extra courses of bricks before adding the roof, and to reduce the pillar size to allow me to have an 8 ft square up and over door. It’s 6m x3 m inside dimension and I have been able to build a 600mm width workbench across the full width and still fit my L322 in.

Click image to enlarge

Hey guys thanks for your replies.

New door is a sectional, and will be higher than the existing up and over. Seems as if the 317cm internal width is on the larger size (for a single) so that cool.

Great pics mate and very useful indeed.

Thank you !!

s

Also you may want to know you need 2m 62 height clearance to put the bonnet in service mode with the car at normal height.

Sounds like a job for my local LR indy, about 500 yds away luckily !!!!!


s